Fryslite - frozen light

Freeze - this is an amazing art of "frozen light". Frieslite is also called light, light, lightpaint, lightgraphite, but all these names combine one thing - drawing with light.





The freeze is performed using only a few basic tools: a camera, a light source, and an uncommon fancy of the author of the drawing.



In order to engage in freezing, you need a camera with the ability to adjust the duration of exposure, while The exposure should be between 10 and 30 seconds. Such opportunities are far from at allSoap dishes, so a semi-professional or professional camera will suit a fris-ski. It is also advisable to have an additional flash, except for the built-in flashlight - this will help create more effective pictures.



An important role in the friseling is also played by the photosensitivity and the diaphragm of the camera. To perform a freeze, as a rule, photosensitivity (ISO) is set in the range of 100-200 units, diaphragm is set to the minimum value, which corresponds to its maximum opening (that is, a maximum of light enters the lens).



As light sources for a freeze-dryer, they are suitable, the main thing is that they give a uniform light. These can be ordinary household flashlights, LEDs, halogen lamps, laser pointers, etc. If you use multi-colored light sources, you can get a lot of different beautiful effects.



How to do freeslate?


One of the main conditions for freeze-diving is complete or relative darkness, so it is performed either in a completely darkened room, or at night on the street.



For frizzly drawing, the camera is mounted on a tripod - to avoid jitter and blurring. Exposure is set long - as much as the idea of ​​drawing requires. The longer the shutter speed, the more time there is to "draw".



In the freezer, two main methods are used: static and dynamic. When the source of light is fizzled for a short time, immobile pre-prepared objects are highlighted for a short time, and when dynamic, a drawing is created by moving light sources.



To create a drawing, frizzly alone can be used in just a few steps:



  • choose a place for the composition

  • adjust shutter speed, photosensitivity and aperture of the camera manually

  • fix the camera

  • sharpen the camera

  • press the self-timer (the delay function of the shutter after pressing the shutter release button)

  • draw a drawing with a flashlight

  • enjoy the result


It is important to remember that when doing a freeze-drawing, the one drawing at the time of the flash of the camera should be able to escape from the frame, if the idea of ​​drawing does not imply the existence of people. As an option, the drawer can "disguise" with the help of dark clothes.



If people in the frame should be, thenPhotographed at the time of the flash should be in the frame, and drawing - not. After the flash fires, the drawing can begin to perform a freeze pattern. Photographed all this time should remain motionless.



The technique of the frizzite is so beautiful and unusual that often photos of freeze-pass are taken as a digital collage or fruit of computer graphics. However, in fact, graphic packages like Adobe Photoshop are used only to correct frizlite images, and not to "draw" freezes from scratch.



Frislite - fascinating and unusual art. Success in this creative field and more inspiration!



Fryslite - frozen light
Comments 0