Bant of satin ribbon by own hands: photo, video

Step-by-step instruction for making a bow of satin ribbon

Make a bow from a satin ribbon with your own handsnot difficult. A quality master class will turn any work into a real pleasure. Depending on the type of bow and the technology of its manufacture, different materials and tools are used. But most often used scissors, satin ribbon, glue, needle, thread, ruler. The bow can be small, designed for decoration, or large and elegant, in Kansas style. Bows can be attached to the bezel, hairpin, or even on the paper gift box. In other words, there are plenty of options for using bow ties from satin ribbons.

Master class 1: beautiful bow of satin ribbon

To make such a bow with your own hands, you will need:

• 
  several types of ribbons: satin, thin yellow, leopard, brown thin;


• 
  cardboard;


• 
  elastic;


• 
  matches;


• 
  glue.

Master class on making a bow from a satin ribbon with your own hands:

1. 
   On a cardboard with a width of 9 cm, wind the satin ribbon yellow. Then remove it and sew it in the center.


2. 
   The thread is tightened and fixed, and the edges of the received bow are cut with scissors to make them more attractive. They will not start to break if singed with their lit match.


3. 
   Thin yellow ribbon folded in ends, andthen again cut the resulting segments down. Having spread the bow, it should be fixed in the middle with the help of a thread. Similar actions need to be done with leopard tape. The ends are desirable to sing. The brown thin brown and the remaining yellow tape should be cut into equal lengths, fixed on the first bow, as shown in the photo.


4. 
   The leopard bow is placed on top of the yellow, it is laid on a ribbon of a thin ribbon. In the middle, you can tie a brown tape, and from the back, glue the elastic band.

Master Class 2: Satin ribbon bow

The next variant of making a bow of satin ribbon is more laborious, but the appearance of the product confirms that the time spent pays off with interest.

He will decorate any hairstyle. To make this version of the bow, you need to use:

• 
  blue satin ribbon with a width of 5 and 2.5 cm;


• 
  silver ribbon 3 mm wide;


• 
  circle of felt about 5.5 cm in diameter;


• 
  a thread;


• 
  needle;


• 
  scissors;


• 
  matches or a lighter;


• 
  glue;


• 
  hairpin.

The satin ribbon, whose width is 5 cm,it is necessary to cut into 6 pieces of 14 cm in length, with a width of 2.5 cm - into 6 pieces of 10.5 cm. Then you need to divide the silver ribbon into 6 pieces of 15 cm in length, and 6 segments of 8 cm each.

The master class consists of the following:

1. 
   Six pieces of the widest satin ribbon fold in half. Collect them on a string, and then pull off the petals, forming a flower. Fix the thread.


2. 
   Similar actions need to be done with segments of another blue tape.


3. 
   From the back edge of the flower must be gluedfelt circle. This will give him a more solid foundation. Then prepare pieces of silver ribbon. Fold them in the form of ears and fix the ends with glue.


4. 
   Lay the received "ears" from the silver ribbon around the large flower, as shown in the photo.


5. 
   Top with a flower of a smaller size. He fix it with glue on the main.


6. 
   The other segments of the silver ribbon also fold in the form of ears.


7. 
   Try to paste them on the top flower.

In fact, the bow of satin ribbon is ready. It remains only to paste in the middle pebbles or other decoration. At the back of the glue, you can attach a hair clip.

Master class 3: a lush bow of satin ribbon

To make this version of a bow of satin ribbon, you should prepare:

• 
  kapron tape length and width of 5 m;


• 
  2 needles;


• 
  a thread;


• 
  the tape itself.

Step-by-step actions with a photo:

1. 
   Prepare the ribbon to make the first petal. To do this, fold one end into a triangle. The result is the inside of the petal.


2. 
   Triangle folded twice, and then fix the corners in such a way that a petal forms. How to do it, clearly seen in the photo.


3. 
   Then, in the same way, you need to make another petal.


4. 
   The resulting triangle should be folded with the ribbon in such a way that a large triangular figure is obtained.


5. 
   Then add the product in half. It is necessary to make one more side of the petal. The resulting triangles should be fixed at the corners using glue.


6. 
   Ribbon fold again in the form of a triangle, then again in half. This will be the next petal of the flower. Repeat the same steps until the tape ends.


7. 
   In the lower and upper end of the figures, connect the extreme lobes.


8. 
   The upper and lower edges of the flower (middle) are fixed.

The resulting bow can be made even more beautiful by attaching a bead or a button to the center. From below, you can sew a hair band or a hair clip.

Master class 3: a bow of satin ribbon

The previous master classes were consideredoptions for making bows as dyeing for gum or hair clips. But, as already mentioned, the scope of various bows is quite wide, so they are used for other purposes. Alternatively, make a decoration for gift wrapping.

To make such a bow, you will need to perform the following steps:

1. 
   Collapse the satin ribbon in several rings, the diameter of which will correspond to the same parameter of the final bow.


2. 
   Smoot the resulting loops, and then make diagonal incisions along the edges, as shown in the photo.


3. 
   Re-tighten the hinges, but now the section of the cuts should hit the center.


4. 
   With the use of ordinary wire or thin tape, attach the bow in the middle. Then each loop needs to be spread out so that the edges of the product are facing in different directions.

Thus, you will get a magnificent bow, which will be a worthy decoration for any gift wrapping.

How can I make such a variation of the bow, shown in the figure below.

Video: how to make a bow of satin ribbon with your own hands

On the video you can see a simple, but original version of making a bow from a satin ribbon.

Another simple variant of performing a bow of satin ribbon is presented on the following video.

The following video shows more complicatedthe option of making a bow from a satin ribbon with your own hands. Despite the laboriousness of the process, the product turns out to be so beautiful that it perfectly fits as an ornament if you attach a hair clip or hair clip to it.