Apparatus darsonval

Apparatus darsonval was named in honor ofFrench physicist and physiologist Arsene D. "Arsonval." D. Arsonval is the author of the method of physiotherapy, which is based on the action of high-frequency impulse current and voltage and low strength. The method was named darsonvalization.
In darsonvalization, the current is conducted to the patient fromapparatus through special capacitor vacuum electrodes. Typically, the darsonval apparatus is supplied complete with a set of electrodes, each of which has its own function. High-frequency impulse current improves blood circulation, normalizes the tone of the skin and vessels.
In physiotherapy apparatus darsonval used fortreatment of disorders in the mucous membranes, surface tissues and hair. But darsonvalization can be used not only for medical purposes, but also for cosmetic procedures. Especially since The darsonval apparatus can be purchased for home use.
What you need to pay attention to, if you wantto buy a darsonval apparatus? First of all, it is important to remember that this is a medical device, and it is unreasonable to purchase medical devices of questionable quality, to put it mildly. So be sure to ask the seller to show you certificate of conformity and registration certificate, which confirm the belonging of the device to medical equipment and its quality.
Also pay attention to the technical specifications. The three most important indicators are the frequency, voltage and strength of the pulsed current. Apparatus darsonval must have a low powercurrent, about 0.02 mA. The frequency of the current is high, usually it is 85-135 kHz. Impulse voltage can vary from 2 to 15 kV, depending on its value, what cosmetic procedures you can conduct.
Low Voltage (2-7 kV) is used to prevent the appearance of wrinkles in the eye area. For darsonvalization of the scalp and facial skin use an average voltage (7-12 kV). A for medicinal purposes (treatment of acne, varicose veins, osteochondrosis) use high voltage (12-15 kV).
The power of the device is regulated by means of a special handle. The power level control knob can be a slider or a slider. The slider is more accurate. Make sure that the position of the knob of the regulator is convenient, because the darsonval unit does not have the functions of disconnection and inclusion in the network. The convenient position of the handle will allow you to adjust the power level without distraction from the procedure.
The darsonval apparatus is equipped with special nozzles-electrodes, which are used for darsonvalization of differentparts of the body: face, head, etc. For darsonvalization of the scalp using a scallop electrode, for darsonvalization of the eyelid - cone or cylindrical, for darsonvalization of the face - mushroom.
Nozzles are inserted into the special holder. It is a cartridge that grips the metal tip of the electrode and presses the contacts of the electrode and the device to each other. The rubber insert in the cartridge should be soft, and not rigid: hard rubber can damage the tip of the electrode.
Qualitative apparatus darsonval must have a technical passport, which will detail itstechnical characteristics, operating methods, operating instructions, precautions when working with the device, the terms of warranty service and contact information of the manufacturer. If the manufacturer provides a warranty on the apparatus, in addition to the data sheet, the seller must give you a completed warranty card.
Darsonvalization is a time-tested physiotherapy procedure that can be performed at home for cosmetic purposes. The main thing is to choose a quality darsonval apparatus and to strictly follow the instruction manual.














