Using the Printer

You can not do without a printer in the office or at home. Models of printers exist the most diverse: from "ancient" matrix "monsters" to ultramodern high-speed laser. The operation of any printer must be done correctly.
Most often in printers failmechanical components and parts. These faults are caused, first of all, by neglect to the rules of operation of the printer. Therefore, you should remember the main rule: the instruction is not just a "piece of paper".
In the instructions for the printer, the manufacturer has already describedand the order of the printer installation, and the order of replacement of cartridges, and the requirements for the quality of consumables. Operation of the printer does not violate warranty conditions, and in the event of a breakdown, the service center may refuse to perform the warranty.
For home use are most often used inkjet printers. Modern models of such printers allow to achieve very high quality of printed images and text.
Printing in inkjet printers is carried outliquid ink supplied to paper through special nozzles. If the printer is idle for a long time, the nozzles may dry up, after which it can be difficult to restore the print quality. therefore it is recommended to print at least once every 1-2 weeks a short text and a picture in order to avoid drying out print head.
In inkjet printers where the print cartridge and ink tanks are separated, you can simply replace ink tanks without having to replace the entire cartridge. This is very convenient, because ink tanks are cheaper.
You can replenish the stock of ink and selfrefilling ink tank, however this operation requires extreme accuracy and accuracy, therefore it is better to produce it by experienced users or specialists from the service center.
In the menu of each inkjet printer, there isspecial maintenance options. Thanks to these options, you can clean the nozzles from clogging, clean the paper feed rollers from paint residues. Apply these options as needed.
Inkjet printers have a special maintenance tank - the so-called "diapers". When this "diaper" is full, it is required to release it and program it "zero". Perform these operations best in the service center, because amateur performance in this case can lead to damage to the printer.
Besides, in the service center it is desirable to visit regularly and for preventive inspections of the printer. Specialists will inspect the printer from the inside and, if necessary, clean it of dirt and dust, oil the mechanical transmission.
For safe operation of inkjet and any other printer You can print only on paper authorized by the manufacturer. Too thin or too thick paper may damage the auto feed mechanism. It can also cause breakage and wrinkled paper, so it is better not to use it for printing.
Laser printers Also quite popular in home life, but more oftenall find their application in various offices. Printing in laser printers is done using a special toner powder. Under the influence of high temperature, the powder is sintered and transferred to the paper surface by the photoconductor.
Therefore, when operating laser printers, it is important to remember that For printing, it is strictly forbidden to use paper that already has printed text or drawing, because under the influence of high temperature the ink can get wet and cause the printer to break.
Refilling the toner cartridge should be carried out only in specializedcenters. Improper refilling can damage the printer. As with inkjet printers, the laser printer should be inspected by a specialist on a regular basis, in order to clean or replace the printer parts as needed.
In this way, the proper operation of the printer is a guarantee of its quality and long work!














