Tubes made of tires

Flower beds made of tires are very easy to make. But it is worth considering that this is a man's job, becauseWith the old tire you have to tinker a bit, and for this you also need to exert some strength. There are a lot of variants for making flower beds from tires with which you will decorate your flower garden.

The easiest option to make flower beds in the country of tires is cut them into two halves. It remains only to dig up the tires and put them inflowers. To give the flower bed brightness, the tires can be painted in various colors. If you do not like this option, you can show a little more imagination and make a whole roller coaster. To do this, do not cut tires. All that is required of you is to fill the tires with earth and lay them out in the shape of a pyramid. At different levels, plant a variety of flowers to achieve an extraordinary result.

Flower beds from tires by own hands

Decoration flower garden in the country can be veryan interesting activity if you have different creative capacities. Of course, these tanks can be made from old tires. There are a lot of options for different flower beds. For example, it can be a round flowerbed-vase in a tire carved in the form of a bell or chamomile. Particularly popular are beds of tires in the form of a swan.

Flowerpot

To make such a flowerbed, you will need an old "bald" tire. On one of the sides, mark the linecut. Let it imitate the flower petals. Then the whole matter of technology. With a sharp knife, cut the tire along the intended line. If the tire without steel fibers, then no difficulties at all should arise.

When the cut is complete, remove the top of the tire. Now you have the most important thing - to turn the tire inside out. In the flower pot you can make a flower bed. If desired, you can paint the pot in a different color. But for this, first the surface of the tire should be degreased, and then apply the paint of the color you need.

By the way, using the same technology, you can make similar vases from whole wheels, rather than a simple tire. Form for the petals can choose any: semicircular, triangular or rectangular. The difference between the vase from the wheel and the tire is practically none. Only in that the flower bed of the tire will stand on the ground, and from the wheel - on a kind of stand.

Flower Swan

A white-painted tire can become an entire work of art, if properly cut out of a swan. To make a swan, do not cut the inside of the tire. Due to its rigid structure, the tire itself will keep its shape.

To make a swan out of a tire, retreat by 3-5 cm from the edge of the tire tread and make two symmetrical cuts along its surface. The length of the incisions should be about 2/3the length of the surface. From the narrow part you should make the neck of a swan. But the wide parts are wings. With the design of the wings you can fantasize and make various cuts that will mimic the feathers of a bird. These can be simple shallow incisions along the length of the surface of the wings. And you can also make small notches of a triangular shape to give the wings more texture. Also, you can bend the wings the way you want. Choose the angle of arching yourself. From the narrow part make the head and neck of the bird. Also do not forget about the tail of a swan. The final touch is the painting of the bird in white. Now you can plant your flowers in it.