Booties-cedar crochet: step by step description with photo, scheme, video

Step-by-step instruction on knitting pinets with sketches

To knit children's products, it is recommendeduse natural thread. So you can exclude the possibility of allergies in the child. Thus, for kynovies, you will need woolen, semi-shirted or cotton yarn. One ball is enough, because the newborn's leg is miniature. Also, in addition, certain tools and materials, such as scissors, ruler or measuring tape, need a needle.

Crochet-cradles for boys

According to this scheme for beginners, you can easily connect booties-kedy hook for a boy. Each step is illustrated, which allows you to better master the technique of implementation.

To tie booties-cake hook for a boy,cotton yarn of white and brown color is required. Also need to use the hook number 2. Knitting should begin with a foot, with a white thread. Approximately the length of the foot of the newborn is 9 cm.

A master class on knitting pinets with crochet hooks is presented below.

Step 1. You need to start from the sole:

1. 
   Type 12 air loops (in.) and 3 air lifting loops (vpp). First row. Spray 5 columns with a crochet (s / n) in the 4th from the hook loop, then make 10 s / n, and the last loop of this chain - 6 c / n. Another 10 similar columns should be repeated from the opposite side of the chain. The first row must be completed with one connecting post in the third air lifting loop.


2. 
   Second row. 3 percentage points and 1 s / n in the same loop of the base, then you need to tie 5 loops of 2 s / n with a common base. Then do 10 s / n and again in 6 loops, bind 2 c / n with a common base. Then - 10 s / n, the circle ends with 1 connecting column.


3. 
   Third row. 3 percentage points and 1 s / n in the same loop of the base. Then alternate 1 c / n and 2 c / n with a common base five times. Then tie 11 s / n and alternate 2 c / n with a common base and 1 s / n six times. After that, you need to knit a circle with / n. The series needs to be repeated, like the previous one.


4. 
   Fourth row. 3 percentage points and 1 c / n with a base, 2 s / n. After that, we knit five times 2 s / n with a common base and 2 s / n. Again, tie 10 s / n and 1 connecting bar into the third air lifting loop.


5. 
   The fifth row of 3 cp. and 1 c / n in this base, 3 c / n, then 2 c / n with a common base and 3 s / s alternate five times. Next, tie 10 s / n, then rotate six times 2 s / n with a common base and 3 s / n. Again, tie 10 s / n and 1 connecting post to the third air lifting loop, as in the photo.

Step 2. The sole is ready. Do not tear off the main thread, you should go to the side of booties-sneakers. It is necessary to tie a circle without excesses, performing relief concave s / n. The next circle should be done half-and-half. Next, you should take a thread of brown and the next circle to knit already, performing poles without a crochet, without adding loops. Then you need to repeat two more circles with a white thread (polus / n).

Step 3. Now you need to go to the spout of booties-sneakers. It is necessary to select on the center 23 loops from the narrow side. The transition from the rim is tied with the help of relief concave pillars. Nose of booties-keda need to be knit as follows:

1. 
   First row. Alternate 2 s / n with a common vertex and 1 column with a crochet. Thus, 15 loops came out.


2. 
   Second row. Knit 2 c / n with a common vertex. The result is 8 loops.


3. 
   Third row. All loops are tied with / n with a common vertex.

Spout booties-sneakers ready. You need to fix the thread, cut it and hide it. To ensure a smooth border in the transition from the sock to the tongue, it is necessary to tie the free edge with staples without a crochet.

Step 4. The brown thread is then fixed toboth corners of the nozzle. The diagram shows how to do it correctly. From one edge of the spout to the other, you need to knit on the edge of the hem / n 1 row. The remaining 9 rows should be done in the same way, reducing 2 loops from the edges (tie it together). At the end, the thread is fixed and cut off.

Step 5. It's time to start knitting tongue booties-ked. It will be made of a thread of brown color. The tongue is tied with returnable rows, with the help of half-pins with a crochet. It is important that it is higher than the edges. The edges can be tied with a white thread. One series is sufficient. b / n.

Step 6. For the lace should be associated with a chain consisting of air loops. It is desirable to make it a white thread. Then the lace is passed between the posts along the edge of the sides.

Crochet hooks for girls

In fact, the technique of knitting pinets-sneakers forgirls, is not much different from the product associated for the boy. Only yarn is picked up brighter and contrasting. For example, you can take a thread of white, red and blue. Or more classic, pink. Everything depends on the taste of the master.

Master class for knitting pinets-keds for a girl:

Step 1. The sole should be knitted according to the scheme.

It is necessary to dial 20 air loops using a white thread.

1. 
   First row. The second loop from the hook is 1 second long. b / n, then - 8 s. b / n in the loop of the chain, 9 s / n. In the last loop, 7 s / n are tied. Then go to the opposite side of the chain. It is necessary to relate, observing the symmetry, 9 s / n, 9 s. b / n and 6 s / n in the first loop of the chain. In the end, you need to make 1 connecting column.


2. 
   Second row. 3 cts, 19 s / n, 5 times 2 s / n with a common base, 20 s / n, 5 times 2 s / n with a common base. At the end - 1 connecting column.


3. 
   Third row. 3 percentage points, 19 s / n, twice with 2 c / n with a common base and 1 s / n. Then twice is wired 2 s / n with a common base and the same number of times the composition is 1 s / n and 2 s / n with a common base. The second side is tied up. To do this, you need to do 20 s / n, then repeat the mirror image of the songs connected twice. At the end - 1 connecting column. A total of 72 loops are produced.


4. 
   Fourth row. For the external half loop, you should tie the s / n without adding. At the end - 1 connecting column.

Step 2. The sole is completed. It is necessary to start knitting the kite sidebars. For this, without breaking the thread, you need to make 2 rows of s / n for both half-loops. Then you need to take a thread of red color (the white yarn does not stop), turn the product out and tie it with. b / n. The red thread is fixed and clipped. The next row must be tied with white yarn c / n.

Next, measure 7 loops from the edge, pre-folding the boot-boot in half. It will be a spout.

To make a side, you can repeat the actions from the previous master class, only the decrease of the loops starts from the third row.

Step 3. To connect the spout and tongue booties-ked, you needdial 4 bp white thread. Then the first row of 6 c / n should be tied. Second row, tie 2 c / n with a common base in each loop. The third row is tied with / n. Then the thread is blue. With the help of it, 14 rows are loosened: even - with. b / n, odd - with / n. The thread is fixed and cut off.

If desired, you can link the logo, but it is not necessary.

Step 4. At the end, booties-keds must be collected. The spout is sewn to the 14 soles of the sole, after having turned the product out. Laces for the lace are lined with a white thread using a needle. For the lace itself, you should collect about 180 air loops and tie 1 row with columns without nakidov.

Video: How to Knit Booties-Sneakers for Beginners

The video presents a master class for beginners in knitting pinets for a boy with their own hands, which will not be difficult to repeat.

The following video will help to connect booties-sneakers "Ladybugs" for a girl.

Another master class for knitting pinets-keds for a newborn, which can be repeated by viewing the video.