Knitted socks with patterns by own hands

Knitted socks with patterns by their own hands: socks-slippers

Very simple in the performance of socks-slippers will bea real godsend for beginners in knitting. For work you will need only two knitting needles and yarn of your choice. The work is done by the simplest garter stitch.

The size of the slipper, and accordingly, the number of loops, is determined by the length of the seam along the sole. Patterns then crocheted.

First we knit a handkerchief. The length is determined by the length of the foot, taking into account the fact that from one side the canvas will be tucked into the heel.

We tie the top with the same yarn crochet, the lower parts of the slipper are stitched, leaving no gaps between the heel and toe pieces.

A nosocle-slippers with a beautiful pattern is ready.

Learning to knit socks with a pattern and buttons: a scheme

Original home socks with buttonswill love all lovers of comfort. For work it is necessary to take straight and toeline knitting needles No. 3,5-4, gray yarn Novita 7 Veljesta (composition: 75% wool, 25% polyacryl, length / weight - 100 m / 50 g) - 150 (150) 200 g. socks will be the size - 30 (38) 42.

Drawing from braid is made according to the specified scheme with the repetition of 1-16 rows.

Garter stitch, used in the scheme, involves tying the front and back rows only with facial loops. Just, only facial, the facial smoothness is tied.

The density of knitting is calculated as follows: 21 the loop of the facial smoothness is 10 cm.

Work begins with the left toe. Type on the straight spokes 51 (61) 71 loops, knit three rows of garter stitching straight and reverse rows. After this, the patterns with braids begin: the first five stitches with garter stitch, another 1 stitch before the rapport, then you need to repeat 10 repeater loops 4 (5) 6 times, and at the end another five loops are sewn again with garter stitch.

Thus, we need to relate two more series, inwhich the last 5 loops on both sides will be dressed with garter stitch (that was the slats). After another two rows, the first loop is made for the future button: 1 facial loop, 2 facial ones, then nakid - and continue the binding according to the scheme. Three more loops are knitted just as accurately in each 10 (14) 14 row. Having drawn the 8th row of the pattern (this will be approximately 16 (22) 22 cm in length), one more facial series should be made with a uniform decrease in the braids 5 (7) 9 loops - 46 (54) 62 loops. The last 6 loops need to be removed on an additional spoke and temporarily put aside.

Those loops that remained are divided into 4 spokes -the extreme will receive 13 (15) 17 loops, two medium - 10 (12) 14 loops. Now you need to take an additional spoke with 6 loops on it, place it underneath the very first knitting needle to tie in the first row these loops and those on the first spoke. Thus, we get 40 (48) 56 loops. They need to be divided equally into each of the 4 spokes - there will be 10 (12) 14 loops. The change of the row is made in the back of each sock - in the middle.

Binding the top, we begin to create a heel. To do this, lay the spokes 2 and 3 to knit 20 (24) 28 loops of the 1st and 4th spokes. In total it is necessary to tie 18 (22) 26 rows with straight and reverse loops of garter stitch. Round the heel, reducing the loop. It is done this way: knit the front row until until the end there are 7 (9) 10 loops left, then, with the viscous viscous, tie two loops together, draw a broach (for this, one loop should be removed without tying, then one face and to stretch it through the removed one). Expand the work and take 1 loop as front (do not need to knot), then knit 6 (6) 8 loops facing, and then the next two loops are performed with the wrong ones. Again, unfolding the work. Again, without tying, we remove one face loop, we sew 6 (6) 8 facial loops, and then 2 more - we connect by facial broach. We turn the future sock. In the same way, the decrements are carried out until there are only 8 (8) 10 loops in the middle. They are divided into two spokes for 4 (4) 5 loops for each. Now on the left edge of the future heel, we evenly dial 13 loops on the first spoke 9 (11), adding 1 loop between the spokes, here we remove the loops of the left part of the heel. Next we follow the pattern, tying the loops of the 2nd and 3rd spokes. Then on the 4th spoke we type 1 loop between the spokes and again 9 (11) 13 loops along the right edge of the heel, taking off the same loops. All knitting is performed around the face.

Wedge of lifting the foot is knitted like this: on the 1st spoke, the last 2 facial loops are knitted together, on the 4th spoke - the first 2 loops with a facial broach. Thus two rows are knit, it is not necessary to subtract. Then two consecutive rows are cut out, 6 rows - not decreasing, 1 - with decrements. You need to do this until all the spokes have 10 (12) 14 loops left. After this, no reduction should be made of 15 (20) 25 cm (until the pinkie is closed).

Now we knit the toe. In the middle and at the end of each knitting needle is sewed along 2 loops together face viscous - 32 (40) 48 loops. So to tie 3 (4) 5 rows, without subtracting. Then the series is repeated with decrements - 24 (32) 40 loops. Without decreasing we knit 2 (3) 4 rows. Now this way you need to decrease in each second row, until there are 8 loops left. The main thread is cut, the remaining tail is pulled together these 8 loops, fix.

In the knitted loops sew large buttons. The right socks are knitted symmetrically.

A simple and intuitive way to knit socks look at the video:

As you can see, knitting socks with patterns is not so difficult. Try it and enjoy the warmth and comfort.