Built-in wardrobe with their own hands. How to make a built-in closet with your own hands: step-by-step photos
The closet is the most convenient solution forcorridor, hall or bedroom. Especially this option is suitable for small apartments. This detail of the interior helps to save a lot of space and at the same time, get a lot of storage space for things. The main distinguishing feature of sliding-door wardrobes is comfortable sliding doors. There are many types of cabinets for every taste. Today we will tell you how to make one of them yourself.
Which closet to choose?
The closet, located in the niche - one of the mostuniversal options. Thus, you do not affect the common space and get a useful structure. In addition, three walls, a bottom and a tire are already available, which means you will save on these details.
If the niche is on the entire width of the wall, thenIt will be possible to make not just a closet-compartment, but a whole wardrobe. You can easily "complete" an additional room in a small apartment, without cutting down the centimeters of the total area.
The next way to fill the space is suitablefor a modern layout of a large apartment or house. This method allows you to divide one large room into two rooms. On the one hand, you can make an entrance hall, and on the other - a living room.
Like simple cabinets, coupes can be angular, transverse or straight. You can place them as conveniently as possible for you.
How to make a built-in closet with your own hands? Master Class
We suggest assembling a closet near the entrance doors incorridor. Two walls we already have, but the third one needs to be done. The outer side will be glossy with a built-in mirror. The dimensions of the cabinet are as follows: width - 1.8 m; height - 2,5 m; depth - 0,6 m.
So, let's get started.
Assemble the frame. Take the partition wall and do everything as shown in the photo below.
Mount the profile frame in such a way that it protrudes forward by 20 cm. Calculate the height on your own according to the selected luminaires (approximately 12-13 cm).
In case the walls are very strong, then to install the partition of gypsum board use jumpers. Put wooden blocks in the profile.
Now make a ceiling layout for future lighting. Wires lay inside a special corrugated pipe to protect against ignition.
Strengthen the structure with a perforated corner, cramp and paint with water-based paint.
The frame for the built-in closet with its own hands is almost ready. Glue the plinth on the ceiling, put a laminate or other material on your floor on your choice. Do not forget to install the plinth on the floor, too.
Use the doors already ready. Do not forget to specify exactly all the necessary dimensions before placing an order. It remains only to collect all the components of the closet.
Secure the upper and lower guide parts with the screws. Insert the door at the top, and then at the bottom. Our skeleton is ready.
Next, go to the installation of the internal parts of the cabinet. Chalk out the placement of each section. Establish a profile from aluminum and fix dowels.
Install partitions and shelves. Tighten the partitions with the screw "Confirmate". To make holes, you will need two drills of different diameters. Close the hat of the screw, and at the end of the second part you will get a hole for threading the screw. At the end, close everything with a suitable color plug.
Place the plastic profile on the edges.
Attach the boxes using the JET method.
Now you know how to make a built-in closet with your own hands! Below, see the video on the topic.
