How to glue wallpaper in hard-to-reach places?

When wallpapering the room with wallpaper, the largestdifficulties cause the pasting of corners, ceiling, places behind the radiator and around the sockets or switches, gluing of curbs. So let's look at how to properly glue the wallpaper in hard-to-reach places.
Glue the wallpaper in the corners
For pasting the corners of the corners, you can use this method:
Stick the wallpaper of the wallpaper so that its edge slightly goes around the corner to the next wall.
Glue the next canvas so that it overlaps the previous one by a few centimeters. To align this canvas vertically, you can use the plumb line.
Hold the ruler, cut with a sharp knife two layers of glued wallpaper and remove the cut edges of the canvas. Wipe out the traces of the adhesive.
Glue wallpapers to the ceiling
Wallpapers on the ceiling are glued from the window deep into the room andThe canvases are perpendicular to the window so that the seams are invisible. For gluing the first cloth wallpaper, you should note the line on which this cloth will be leveled. Using a cord, chalked, this line is easy to draw.
It is difficult to independently wallpaper the wallpaper with a ceiling: it is necessary that someone else holds the part that has not yet been glued, while the first one is leveling the glued one.
We glue the wallpaper behind the radiator and around the sockets
The places behind the radiator and around the outlet are one of themost difficult of access. To glue wallpaper on the wall behind the radiator, you need to cut the wallpaper in the places of the radiator mountings. To smooth the wallpaper, it is most convenient to use the mop, with a clean cloth on it. If you do not need to completely cover the wall section behind the radiator, then it's enough to cover the radiator wall by 10-20 cm.
To wallpaper around a site around the outlet orswitch, you must, first, turn off the electricity and remove the covers from the outlet or switch. Secondly, you need to cross the center of the box to cut the wallpaper crosswise. Thirdly, the resulting edges must be folded inside the box and put the cover of the socket or switch in place.
Glue curbs
When pasting curbs on a smooth wallpaperit is enough to mark out their location (for example, using the level) and, using a special curbstick glue, paste on the wallpaper. However, when pasting a border on a relief wallpaper, this method is not suitable. Therefore, if the border is glued to the wallpaper with a relief, you need to cut the strip to the size of the border from the wallpaper glued with a sharp knife. Then the border is glued to the vacant place.
If the border needs to be pasted around the door orwindows, then you need to glue the strips of the border so that they overlap each other. Then you need to cut both curb layers with a knife and remove the cuttings. Wipe off the traces of glue.













