How to stick the film on the phone. Stick the protective film without bubbles.
The main task of coating for touch phones- Protection of the screen from all sorts of mechanical damages. Even if you purchased a special case for the device, this does not guarantee its complete safety. During a call, the display may accidentally be scratched on the earring or solid garbage will enter the cover. In the process of active use it is absolutely impossible to provide sterile cleanliness of hands, and fat discharges, sweat and dust very quickly will render the device unusable, reducing the sensitivity of the screen. The protective film on the phone significantly prolongs the operating time and facilitates the care of it.
How to properly glue the film
It is important not only to be able to stick a film onphone, but do it as correctly as possible. Bubbles are the most common problem and evidence of unprofessionalism. To properly glue the film, you must observe the maximum accuracy and follow the instructions. For each mobile phone model, an individual film is available on sale, corresponding to the unique dimensions of the touch screen and having the necessary slots. You can buy it at an online store or at any point of sale of mobile equipment.
Tools for work:
Protective film for your phone model;
napkin for removing dust without pile (microfiber);
squeegee.
For work it is desirable to choose a clean room without dust and drafts. If this was not found, you can go to the bathroom.
How to glue the film:
Wash your hands thoroughly to degrease them.
If an old protective film is glued on the screen, remove it, gently prying the corner with a squeegee.
Wipe the display with a clean dry cloth tothere was not a single spot or speck left in it. Do not use any liquids, even those specially designed for cleaning computer equipment. Optimum option - a special cloth for cleaning LCD monitors.
Remove the new film from the package and inspect it. On both sides it is covered with special protection, equipped with stickers. These transport layers are numbered: # 1 and # 2. Do not remove the first layer immediately, but start gradually gluing from the widest and the straightest side of the screen.
Separate the first layer of transportation protectionapproximately 1/5 of the part, put on the screen and align the edge so that it clearly coincides with the borders. This is the first most important step on which the success of the operation will depend.
Carefully watch for the adhesivethe surface does not get any dust or debris, and do not touch it with your hands. Gradually, tape the film on the phone, separating the transport layer # 1 and smoothly smoothing the surface with the pads of your fingers.
When the entire layer # 1 is separated and the film is on the phone, remove the # 2 layer.
See if bubbles have formed. If so, then "expel" them with a squeegee. This applies only to large bubbles - small with time will disappear during the operation of the phone.
Wipe the screen with a tissue. Helpful hint: do not wind the edge of the protective film under the very boundaries of the screen, but leave a gap on each side of approximately 0.5 mm. Not everyone has the first time to get a perfectly smooth film without bubbles, so if you do not achieve the desired result, just remove the coating and repeat the operation.
How to paste a film on the phone without bubbles
To create bubbles during the work,you must act as carefully and follow the instructions. Above we described the process of gluing an already finished film for a specific phone model, but many prefer a more budgetary option, buying a universal protection for the technology. Also, universal film will be the best solution for new phone models, accessories and accessories for which have not yet been available for sale in all stores.
How to paste a universal film:
First you need to cut the cover correctlystrictly under the configuration of the model. To do this, you can use protective plastic, which is glued to the original packaging of phones. If this cover has long been removed, you can make a template yourself by attaching a tracing paper to the screen and circling it around the perimeter.
Attach the template to the universal film and align it over the existing mesh.
Cut out with a clerical knife or scissors. Do not forget to make apertures for the speaker and the menu buttons (if any).
Wipe the screen of the phone with a microfiber, which is usually included in the package with a universal film.
Make a soapy solution, diluting 1 drop of shampooin 20 ml of water. Using a soft art brush, apply a thin layer of the solution to the screen. It will not allow the film to stick, until you align it in accordance with the configuration. Some prefer to stick without a solution. In this case, we recommend using the instruction described above.
Universal film has two coatings -transparent and mesh. Remove the transparent and attach to the screen. 7. Align and remove the second cover. 8. Take the plastic card and lightly press the "blow out" bubbles, moving from the center to the edges.
Using a cotton swab remove the soap composition from under the protective coating, making sure that it does not penetrate the speakers.
Helpful advice: if, despite all precautions, dust gets under the film, remove it, gently rinse it under running cold water, dry completely and pour again.
We glue the protective film
Typically, the life of any protective filmwith active use of the phone is about a year, so it will be useful to learn how to glue it yourself. To more accurately glue the film, it is recommended to leave around the edges an allowance of about 0.5-1 mm. The cause of the formation of bubbles are microscopic specks that stick to the back of the film and do not allow it to fit snugly against the surface of the screen. Therefore, it is important to conduct the operation indoors without dust and drafts, and never to touch the sticky part with your hands.
Correctly to stick a film on phone will not makeif you follow any of the above instructions clearly. With a successful outcome of the case, the device will last much longer and retain an aesthetic appearance.
