Fir tree made of corrugated paper with own hands: master classes with step-by-step photos, video.

New Year tree made of corrugated paper: master class with photo

Let's make a new-year tree of "traditional" green color. First we will prepare the necessary materials and tools.

Step-by-step instruction

1. 
   We make a preform-cone of cardboard under our tree. The sides of the details are fastened together with scotch tape.


2. 
   A sheet of green paper is cut into strips. Along each strip, make small frequent incisions - fringe. This will be the needles of our creative forest beauty. Obtained "hairy" stripes on the one hand we collect on the line.


3. 
   We glue the green "branches" to the cardboard cone - the Christmas tree is ready!

How else can you make needles? Corrugated paper is tightly wound on a pencil, which is then taken out. At one end of such a "roll" we glue the "twig" to the cone. It turns out a very furry New Year tree.

To make the composition complete, you candecorate the tree with beads, asterisks, paper snowflakes, tatty pieces and bows. It is important to adhere to the measure - because our green tree is beautiful in itself.

How to make a Christmas tree from corrugated paper: a master class with a photo

Options for creating paper New Year's handicraftsthere are many. At this point, fantasy will tell you - just choose! Let's make a gentle-lilac tree, and as ornaments we use beads and sequins.

On the photo - a ready fir tree made of corrugated paper:

We stock up with materials and tools:

• 
  corrugated paper


• 
  cardboard


• 
  scissors


• 
  thread with a needle


• 
  thermal gun


• 
  elements of decor - beads and sequins

Step-by-Step Guide to Action

1. 
   First you need to cut out the cardboard blank for future fir.


2. 
   We glue the part and form a cone.


3. 
   We proceed to create "twigs" of the tree. From corrugated light lilac paper, we cut off strips about 5 cm wide. We calculate the length by measuring the circumference of the cone and multiplying it by two or three. Strips need to be sewn with a thread along the entire length (the distance from the edge is 0.5 cm). Ready-made blanks remind such paper ryushechki-"cuffs".


4. 
   Now we need to give a "wavy" form to ourfor which we simply stretch the paper a little. Note: the length of each subsequent workpiece must be less than the previous one. After all, the fir-tree gradually "narrows" from the base to the top. Some of the topmost ruches should also be smaller and wider.


5. 
   By this time our cone has already dried, so that it is possible to paste corrugated "skirts" on its surface. We start from the bottom, stepping from below about 5 cm.


6. 
   Then, just above the first row, apply glue andwe put the second workpiece, "ryushku", and after it further to the top. Thus, a multi-tiered Christmas tree is made of corrugated paper. We decorate the design with shiny sequins and snowflakes.

Herringbone made of corrugated paper: master class with photo

Furry three-dimensional Christmas tree fromCorrugated paper is obtained using a completely simple technology. Such a tree is perfect for decorating a house or a workplace in the office. And if you add a bright scarlet bow and gold or silver threads to the beads, then this exclusive ornament will come out.

Consumables and necessary tools:

• 
  cardboard - A4 format


• 
  corrugated paper green


• 
  glue


• 
  scissors


• 
  pencil


• 
  beads and bow

Step-by-step instruction:

1. 
   We determine the size and height of the future tree, after which we draw a circle on the cardboard and cut it out. Make a cone and glue along the edges.


2. 
   We wrap the cone with green paper and glue it together.


3. 
   We cut strips of corrugated paper and make small "fringe".


4. 
   We got a long workpiece, which you need to wind on a pencil. Glued at the base.


5. 
   We begin to glue the green "needles" tightly tothe surface of the cone - what a miracle the New Year has turned out! In conclusion, we put a beautiful bow on the top of the Christmas tree, and decorate the branches with threads of golden beads.

In the photo there are different versions of wonderful paper fir-trees:

New Year's hand-made fir-tree made of corrugated paper, video

An unusual decoration, made by own hands,always attracts attention. Here you can fantasize from the heart - the Christmas tree can be any color and design. This video presents in detail the process of creating a New Year tree from corrugated paper. Successful to you hand-made articles!