Trees of beads with their own hands: acacia

Each skill woven various beadwork productsin its own way, using both well-known techniques and personal little tricks. For example, it is possible to make trees from beads using weaving techniques. From the beads you can make different trees, from blooming cherry blossoms to weeping willows. In any interior, such a decorative bead tree looks great acacia.

Trees of beads with their own hands: acacia

To weave such a tree is very simple. We will need such materials and tools for weaving:

• beads of yellow color


• bugles green


• beads green


• wire


• silk threads brown


• floristic ribbon brown


• paint tape


• ceramic pot


• alabaster or gypsum


• decorative stones
  

The whole work on weaving of a tree from beads can be divided into several stages. First you can weave the "clusters" of the burning acacia.

To do this, it is necessary to cut off a piece of wire with a length of 1.3 m and, having slightly retreated from the edge of the wire, thread 5 yellow beads. Make a loop by twisting the wire a few turns. Similarly, make 2 more loops. It turned out 3 loops, which will make up the "tip" of the bunch.

Now it is necessary to cut off the coil of wire yetone piece - 20 cm. The resulting length of wire is bent in half and using the long end of the main wire, to connect both segments - two or three spiral turns will suffice. Next, we need to weave 2 more loops, 5 beads each. Hinges should be placed somewhat differently from the previous ones.

Gradually increase the size of the buttons. So, further weave the loops, typing 7 beads (4 loops), 10 beads (4 loops). Each four loops form one row, between the rows it is necessary to make a twist - 2-3 turns.

For weaving the next series, the beads are larger than the main ones. The first row - 3 beads in a loop, the second - on5 beads, the third - on 7. The next row of weave follows, combining the beads large and fine: 7 smaller beads are made on the wire and a loop is made, then around this loop a loop made of large beads is made. Another two or three rows should be weaved in a similar way, but already using 9 beads in small loops.

Thus, it turned out to be a complete bunch. On the whole tree, they need, depending on the size, about 10-15 pieces.

The next stage is the weaving of blanks. It is necessary to take a piece of wire with a length of 60 cm andapproximately in the middle to type the beads in such a sequence: bugles, 5 green beads, bugles. Twist the eyelet. Then make two more similar loops, 4 loops, in which instead of 5 beads, 3, 4 final loops are used, in which there will be only one bead. The loops should be placed as usual, the acacia leaves on the petiole.

Such blanks are necessary for the assembly of wood from beads of the order of 20 pieces. Still it is possible to weave several dozen blanks of leaves of smaller size.

The final stage is the assembly of the tree. Begin with the assembly of individual branches. It is necessary to take one piece of foliage, silk threads. Thread the barrel blank about 1 cm. Then, attach one more to the workpiece, and then attach the bunch. A branch of the future tree has turned out.

Now, in an arbitrary order, the remaining branches from the remaining workpieces are assembled</ strong>. When the assemblage of branches is completed, from 3-4 receivedBranches need to use a floral tape to make larger branches, and then collect them into a tree. During the work in order to make the "trunk" of the tree thicker, you can use paint tape.

The ready-made tree remained only "planted". In the ceramic pot you need to fill in the solutionalabaster or gisp, put the wood in the solution and leave to dry, pre-backing. The dried alabaster will firmly grasp the tree and fix its position. Over the frozen solution with a transparent adhesive, you can attach decorative stones. Here's a bead tree and it's ready!

Weave trees from beads with our own hands - it's very exciting and interesting, do not be afraid to experiment! Have you tried making bead trees with your own hands?