How to make a rocket with your own hands made of paper, cardboard, bottles, matches and foil. Space rocket with their own hands, which flies - models and circuits

How to make a space rocket with your own hands from improvised materials - a step-by-step master class for children and parents

To give the child a new fascinatinga toy, not necessarily to visit shops and auctions of expensive children's goods. You can make a bright, interesting and, most importantly, a safe little thing with your own hands. For example - an intergalactic rocket for entertaining role-playing games and virtual travel. And our step-by-step master-class "How to make your own space rocket from improvised materials" will simplify and accelerate the collective creative process of parents and children.

Required materials for a rocket from improvised materials

• 
  plastic bottle


• 
  colored double sock


• 
  glue gun


• 
  a sheet of red felt


• 
  dense foil


• 
  cardboard


• 
  scissors


• 
  yarn of red and yellow color


• 
  a tube of paper towels


• 
  thin lace

Step-by-step master class for children to create a space rocket from improvised materials

1. 
   Wash empty plastic bottle with warm water and dry it. On a clean dry container pull the colored sock. Tie a thin cord under the bottom of the bottle, and cut the tail.


2. 
   From red felt cut two circles with a diameter of5 cm. Glue the pieces on the ready base of the rocket, imitating the portholes. On red circles, fix the same round parts of dense foil with a glue gun, but with a smaller diameter. Approximately 3.5 cm.


3. 
   On a sheet of white cardboard, draw three "fins." Cut out the pieces and paste the point down to the rocket from three sides.


4. 
   From a cardboard tube (from toilet paper orpaper towels) cut the ring, 5-6 cm wide. Wrap the part with a thick foil. Wrap the red woolen threads on the palm of your hand, then glue the resulting hank with one side to the previously prepared part.


5. 
   Do the same with the yellow yarn. So it will be possible to make the lower part of the rocket with decorative flame tongues. Fix the part with a glue gun at the bottom of the bottle. At this step-by-step master class for children and parents "How to make a space rocket with your own hands from improvised materials" is completed!

How to make a bright rocket from cardboard and paper with your own hands - schemes and models

If babies-preschoolers are pleased and delighteda small toy rocket, the size of a bottle, then older children will like the spacecraft "in full growth." Own intergalactic ship will allow younger schoolchildren to feel like real captains and show courage, bravery and courage, as the main features of a masculine character.

How to properly make a large model of a rocket made from paper and cardboard with your own hands for the child, see the next master class with diagrams, photos and videos.

Required materials for the model of a rocket made of paper and cardboard with their own hands

• 
  carton boxes


• 
  colored paper


• 
  cups of yogurt


• 
  disposable plates


• 
  plastic covers and buttons


• 
  letters and figures on an adhesive basis


• 
  bobbins from threads


• 
  flower pot


• 
  polystyrene circle and lengths of fabric


• 
  letter stencils


• 
  markers


• 
  scissors


• 
  pencil


• 
  satin ribbons


• 
  dense foil


• 
  glue gun

A simple diagram of how to make your own hands a model of a rocket made of cardboard and paper

1. 
   Start creating a bright rocket by enlistingsupport of kids. Let the children help you with your favorite toy tools. As the basis of the rocket, use a large box of household appliances. Ideally - from the refrigerator.


2. 
   The top of the rocket is made from a colored flower pot, disposable dishes and plastic bobbins from sewing threads. Garnish with details of stretch satin ribbons and three-dimensional stars of colored paper.


3. 
   In the front wall of the rocket, cut out a round window. Foam wrap a circle with colorful satin ribbons and glue it to the panel in place of the porthole. Just above, glue several bobbins from the threads and mark them with sticky numbers. So it will be easier for a small pilot to count the time before starting. Below the porthole, place one more dashboard to make the rocket more interesting.


4. 
   On the right side of the space rocket, equipthe fuel tank cap with bright plastic buttons. To do this, plastic lids from bottles, coils from threads, old buttons from different devices will be useful.


5. 
   Do not forget about the front door. Draw a large oblong rectangle on the back of the rocket and cut three sides (bottom, top and right). The remaining left side will serve as a veil. Decorate the captain's door with decorative elements.


6. 
   On a thick cardboard, draw two "legs"cut out the details and film them with foil. Fix the elements on the bottom of the right and left walls of the rocket. The spacecraft is ready for this. Visualize how to make a bright rocket from cardboard and paper with your own hands, see the diagram of the model.

How to make a rocket with your own hands so that it flies - step by step instruction with photos and videos

Even using the most primitive wastematerials (boxes from sweets, cardboard tubes from napkins, etc.), you can make by your own hands an unusual rocket that will fly. Of course, she can not plow the expanses of the universe, but safely go on a trip to the children's room. Take advantage of our step-by-step instructions with photos and videos to make your children a nice gift to the significant Cosmonautics Day.

Required materials for a flying rocket from paper with their own hands

• 
  a tube of paper towels


• 
  cardboard


• 
  glue


• 
  scissors


• 
  pencil


• 
  brushes and paints gouache


• 
  permanent marker


• 
  yarn


• 
  straw for drinks

Step-by-step instruction with photos and videos on creating a flying rocket with your own hands

1. 
   Prepare all necessary parts from cardboard. The long tube is divided into 2 parts (short and long - 1: 3). In both parts, make three notches, as shown in the photo. From a flat sheet of cardboard, cut out the wings, racks and other elements.


2. 
   Collect the details in the rocket mock-up. If the elements are poorly fixed, extend or straighten the slits.


3. 
   If all the items converge, disassemble the designer again and paint all the details in white gouache. Black pigmented marker leave characteristic drawings and inscriptions.


4. 
   Fold the paper rockets and glue the parts together with a silicone adhesive gun or PVA. Attach a straw to the spacecraft along the body and fix it with adhesive tape.


5. 
   Through a straw stretch a thick thread andpull it from wall to wall. Now you know how to make a rocket with your own hands, so that it flies, by step-by-step instructions with photos and videos. It's enough to push the spacecraft lightly and he will safely fly across the room.

How to make a simple rocket from a bottle with a trigger mechanism, so it flies up

If the children have grown up a long time and no longerare interested in toy models made of cardboard, suggest that they make an uncomplicated rocket with a trigger that can fly up high and effectively. Be sure, the trick with the launch of the spacecraft, even in an adult, will cause wild enthusiasm. What can we say about impressionable adolescents.

Required materials for a simple rocket from a bottle with a trigger

• 
  cardboard thick


• 
  cardboard thin


• 
  Scotch


• 
  plastic bottle


• 
  plasticine


• 
  wine cork


• 
  pencil


• 
  scissors


• 
  Bicycle Pump

Step-by-step instruction on the creation of a simple rocket with a trigger

1. 
   Sheet of thin cardboard roll into a cone. Cut the edge to make the shape smooth.


2. 
   Paste the finished cone with colored tape, this will strengthen its resistance to water.


3. 
   Empty the bottle and wash it. Paint the container in any color, if desired, draw an emblem or leave an inscription.


4. 
   The main part of the rocket - the cone - is glued with liquid silicone to the bottom of the bottle. Try to make the design as flat as possible.


5. 
   From the more dense cardboard, cut 3-4right triangle. Glue the parts to the bottle. So the rockets will have tail keels. Ideally, the "legs" should end at the level of the extreme point of the neck of the container.


6. 
   Weight the bottom of the rocket. To do this, wrap a piece of plasticine around the neck of the bottle and mask the cargo with adhesive tape.


7. 
   Pour 1 liter of water into the bottle.


8. 
   In the wine stopper, make a thin hole in the needle. The size of the hole should not exceed the diameter of the needle from the bicycle pump.


9. 
   Carefully insert the stopper into the neck of the bottle. Firmly insert the needle from the bicycle pump so that it does not jump out.


10. 
    Take the rocket neck to the top and connect it to the pump. Flip the spacecraft and set it so that it does not fly in your direction.


11. 
    Hold your hand, puff the rocket with air. Then release the craft and continue to pump the air. A simple rocket from a bottle with a trigger will soar as soon as the cork no longer holds the head.

How to make a rocket out of matches, foil and other improvised materials with your own hands on video

And for those who seek to remember the merry andcarefree childhood, being already old enough, we have prepared another master class with a video for making a flying rocket from matches, clips and foil. At this time, you do not have to make crafts from cardboard, paper, bottles and other improvised materials. It's enough just to remember that very simple model that flies, and carefully reproduce it, observing the safety technique. And if you can not restore the step-by-step instruction in memory, see the video "How to make a rocket from matches, foil and other materials with your own hands."