Frames for photos with a furnish from a foil

You will need:

• 4 square wooden frames of the required size


• metal foil for gold, silver, copper and color (with divorce)


• primers


• wide flat brush


• large soft brush


• soft cloth


• old plate

Performance:

Squeeze out a little special primerfunds for an old plate. Then apply it on the entire outer surface of the wooden frame with a flat brush. Leave to dry a little so that the surface is slightly damp.

Dampen the pads of your fingers with water and takea sheet of metal foil the color you need. Then put it on the frame covered with a primer - the metal foil itself will be connected to the primer. And you must make sure that there are no bubbles. In conclusion, you can iron a surface with a rag or a soft brush. Only use caution: the metal foil is very thin, it can easily burst.

In this way, cover with metal foilthe right color of the whole frame. Priming agent acts in this case as an adhesive. When everything is dry enough, bend the protruding parts of the metal foil with a soft brush. О In those places where the foil is not stuck, apply once again the primer and repeat the whole process until the frame is completely covered with metal foil.

Process thus one frame under silver, another under gold, the third under copper, and one more make color with divorces.

For fashionable antique style first paint the frames in different colors, and thenApply the metal foil with a primer. In this case, stick it not very tightly, so that there remain small cracks through which the previous layer of paint would be visible. Gold is especially suitable for gold as a background color red. For silver, blue is recommended, and the primer is suitable for copper. The strongest contrast can be achieved if you use black as the background.

Such frames especially suitable for pictures of nature and flowers. And if you hang frames close to each other in one line or arrange them with a square, then this will emphasize the design style of the frames.