Photo frame Fresh news

Photo frame "Fresh News"

To make this frame you will need:

• cardboard box


• newspaper


• PVA glue


• glass 10x15 cm


• mocking knife

Performance

Cut the box in the corners. Draw a rectangle of 20x25 cm, step back from each edge inward by 5 cm and draw lines parallel to the sides of the rectangle. With a knife, cut out the rectangle and the hole inside it. Make two more of the same details. This is the back of the frame.

Draw a rectangle of 20x25 cm. retreat at 5.5 cm, draw lines parallel to the sides of the rectangle. Cut out the rectangle and the hole in it. Make two more of the same details. This is the front of the frame.

Glue together the three parts of the back of the frame. Glue in the same way the details of the front part. Dry under the press.

Glue both parts of the frame, dry.

Cut the newspaper into small pieces. Glue them frame in different directions - let newspaper pieces overlap each other, go from one side of the frame to the other. Dry well.

Pick one of the cut internalrectangles so that it is sufficiently tightly inserted into the opening of the frame. Cut out a strip of cardboard, cut one side at an angle of 45 degrees. Attach to the standing frame and cut it so that a stable foot is obtained. Two pieces of newspaper glue the leg perpendicular to the back of the frame. Pour the cover with the foot on both sides of the newspaper. The joint of the legs and lid is strengthened in several layers. Dry it.

Insert a 10x15 cm glass into the frame and the back cover - the frame is ready.

In general, it must be borne in mind that such a photo frame can emphasize its design a snapshot, or may become its continuation.