New Year's crafts with their own hands: a sheep made of cotton wool, a master class with a photo

Necessary materials:

• 
  white and black cardboard


• 
  cotton wheels


• 
  PVA glue


• 
  simple pencil


• 
  scissors


• 
  red yarn


• 
  eyes from an old toy (can be replaced with cardboard)

Sheep from cotton wheels: step by step instruction

1. 
   To start with a simple pencil on theOn the back of the white cardboard, it is necessary to draw the contours of the future sheep. You can use a template downloaded from the Internet, or you can just draw a 3D cloud. This will be the body of our sheep.


2. 
   On the back of the black cardboard draw an oblong circle - the basis for the head. It is also necessary to draw a small spout, oblong ears and four legs.


3. 
   Gently cut out the resulting blanks.


4. 
   With the help of glue, fix the legs to the body of the lamb.


5. 
   Then proceed to the formation of our woolsheep. To do this, we paste the PVA glue on the body pattern and start one by one to glue the cotton balls or balls to it. If you want to get a more shaggy lamb, you can glue and large ragged pieces of plain cotton wool.


6. 
   On the preparation of the future head we glue the ears,nose, toy eyes. If you do not have an eye on an old unnecessary hand, you can just cut out two small circles of white cardboard and draw pupils on them. From a piece of red yarn we form a smile and also fix it with glue.


7. 
   At the last stage we glue the received head to the trunk. Sheep from cotton wool with her own hands for the New Year 2015 - ready!

A voluminous lamb from cotton balls: a step-by-step master class

This simple version of the New Year crafts will allow you to create a voluminous statuette of a sheep that will surely please your relatives.

Necessary materials:

• 
  paper or newspaper


• 
  a tube for black juice


• 
  scissors


• 
  black colored paper


• 
  cotton balls


• 
  glue


• 
  duct tape

Step-by-step instruction:

1. 
   Crumble paper or newspaper into a small ball - this will be the basis for the body of our sheep. Tightly wrap it with adhesive tape (scotch tape)


2. 
   From the straw for juice we will make the legs, so it must be cut into 4 identical pieces


3. 
   With the help of scissors it is necessary to make 4 holes in the ball-body, insert the tubes there and fix them with glue


4. 
   Then proceed to the formation of wool. Spread glue with cotton balls and gently glue them to the body


5. 
   From black paper we cut out oblong ears and head of a lamb. We stick the ears and eyes to the muzzle


6. 
   We connect both templates (head and body) with glue. Our dear fake lamb - ready!