New Year's balls with their own hands: photo master-class
What a New Year's holiday without a Christmas tree, pleasingchildren toys and beauty. At the most worthy place you can place, of course, balls made by yourself. In this article, we show two ways how to make a New Year ball with our own hands.
Ball of paper
To make such a Christmas tree toy it is necessary to prepare:
- colored paper;
- scissors;
- Stapler clerical (just in case);
- ruler;
- thin tape of bilateral type or glue-pencil.
Instruction:
To make your own hands a New Year's ball, prepare 12 sheets of multi-colored paper, 4 copies of each color, folded into a pile.
Then you need an object with roundoutlines. We took a glass and drew a contour on the top sheet of paper. Then we cut the circles carefully with scissors. You can cut the entire stack at once or split into two stacks thinner.
Each received circle must be bent in half andAdd them together, combining the available colors in a symmetrical order. Now, on the fold line, you should fasten the circles with a stapler or thread with a needle. Then you need to take a sheet of A4, on which to draw another template, with it you can glue circles.
We divide the semicircle into three equal parts, we makea mark of the top and bottom third (see photo), we combine the center of a circle and a ruler, we conduct lines. Then you need to attach a ruler and combine it with the line, for gluing the desired area with glue. It is necessary to apply glue only the upper part. Turn the page of the round book upside down, apply glue from below, and so on.
It will be necessary to glue in turn the lower one, thenupper part, reaching the central sheet. At this point, for beauty, you can paste a thread that will serve as a ball holder. A paper Christmas ball is ready! You can hang it on a New Year's beautiful tree.
A ball of threads
If you make a ball of threads, it will decorate the tree, and you can give it to the New Year's holiday.
Materials:
- several balloons;
- PVA glue;
- dense decorative threads or multi-colored thin cords. If you take thin threads, the process of making the ball will be very laborious, and the ball will not keep the shape;
- scissors;
- thick sewing needle;
- A drill for glue, in which it is necessary to make holes;
- for decoration of balls - threads from beads.
Instruction:
Inflate the balloon to the required size,tie it. To give a rounded shape, you can mash it a little. Embroider the decorative thread in the needle, pierce the plastic container into which you pour the glue. Holes pierce closer to the bottom of the container. Pass the thread through and pour in the tank PVA, without diluting it with water.
If the ribbon is thin, completely soak itin glue. Pass the thread through the container filled with glue, soak it, wind it on the ball. Turn the ball constantly to change the winding direction. Remember, you will have to remove the ball later. When the density of winding reaches the desired condition, cut the thread and leave the tail, from which you make the loop.
Dry the ball by a natural method for up to two days,you can use a hair dryer - for about 10 minutes. The main thing is to make the glue dry and harden. Now you can pierce the balloon, left inside, with a needle. Now you need to carefully remove the blown ball, pulling it in place of the string.
Use the remaining tail asloop, which is tied to the ball. New-made Christmas tree toys will become the main attribute of the holiday. It will be more fun to meet them in 2014. These decorations are beautiful and economical, besides, they will never break.
Author: Katerina Sergeenko
