How to fill an electronic cigarette

Before you fill an electronic cigarette, you need to choose a liquid for refueling. The liquid base consists of propylene glycol(55-62%), glycerol (30-35%) and distilled water. In addition, the basis is added flavor and nicotine. But nicotine may not be - non-nicotine fluids are usually used by those who want to quit smoking.

According to the content of nicotine, smoking fluids are divided into such categories:

• 
  Non-nicotine - 0 mg / ml
• 
  Ultra Light - 3 mg / ml
• 
  Light - 6 mg / ml
• 
  Medium - 12 mg / ml
• 
  High - 18 mg / ml
• 
  Extra High - 24 mg / ml

Still on sale basis for self-preparation of liquids, in them the content of nicotine can reach 36 mg / ml.

Also, liquids are divided into types depending onthe ratio of the base components (water, glycerin, propylene glycol). This ratio affects the amount of steam, its softness, and also such an indicator as trothit. Trothit - this is an irritation of the upper respiratory tract, many smokers smoke just for the sake of this sensation. So, by this criterion there are three types of mixtures:

• 
  Traditional - the optimal combination of sensations when smoking, taste and quantity of steam.
• 
  Ice blade - the feeling is more like smoking a normal cigarette: a couple less, and it is drier, the taste is saturated, trothit is pronounced.
• 
  Velvet cloud - the steam is mild, the taste is weaker, trothit is not expressed.

So, you have chosen a liquid, but do not rush to fill an electronic cigarette: first you need to understand the device cartridge. Most of the cartridges consist of awhich is placed a container for liquid. In the container is a fibrous mass - sintepon. Synthepone is needed for dosing the liquid; thanks to it the liquid is retained in the cartridge, and not immediately poured all onto the atomizer (steam generator).

In addition, the cartridge can be one or two silicone or plastic plugs, do not allow the liquid to pour when you turn the cigarette with a mouthpiece downwards or get into your mouth with too vigorous puffs. But at the same time, there are small holes in the plugs that let steam through.

Now, knowing what the cartridge is,you can fill an electronic cigarette. Take the cartridge in one hand and keep it upright, with the sintepon up. In the other hand, take the vial with a dispenser or a pipette with smoking liquid and drip on sintepon three drops. In order for the liquid to fill the cartridge evenly, you can slightly "turn" the sintepon with a toothpick or a paper clip. Repeat the manipulation two more times and drop the last drop on the sintepon.

You can fill an e-cigarette and a little differently, starting filling from the bottom layers of the synthepon. To do this, take a paper clip and insert it into thecontainer to the end, thus pressing the sintepon to one of the walls. In the formed space is buried a liquid. After refilling, the sintepon needs to be spread out so that it is completely impregnated with the liquid. You can also fill an electronic cigarette with a syringe (medical or from a special refueling kit).

From time to time, remove the plugs and filler from the cartridge and rinse the cartridge. You can use detergents, but afterthe cartridge must be thoroughly rinsed. Synthepon detergents can not be washed! Synteponovy liner withstands 5-10 refills, after which you need to replace it or the entire cartridge.

And remember that to fill an electronic cigarette it is necessary extremely accurately. If you pour too much liquid, it can "pour" the atomizer. If the liquid is too small, it can cause the atomizer to overheat.