How to clean the chain (silver) at home. How to clean a chain of rust and black
Jewelery from silver is used for todayday is very popular. With an affordable price and an excellent aesthetic appearance, the products from this metal are not inferior to the nobility of gold or platinum. However, silver needs correct and timely care, because otherwise you can get an unpresentable, dim decoration. And because many will be interested to learn how to clean the chain and other products from silver.
What to clean the silver chain?
It should be noted that plaque on silvervaries from weak yellow to blue-black hues. It appears from the contact of the product with household chemicals, some products (egg yolk, onions, salt), cosmetics, depends on the humidity of the air. Remove such plaque from the jewelry can be and at home, and you do not have to carry it to a specialized workshop. To maintain the excellent state of the silver chain or other decoration, you need to clean every two months. It is also desirable to polish the jewelry daily with a flannel cloth.
The most effective method,how to clean the silver chain from the coating, is the use of a mixture of water and soda in a ratio of 1 to 3. After the performed manipulations, you should rinse the chain under a stream of cold water and dry it on a towel. Also, the oil from olives (the first pressing) will do the job well - moisten them with a soft flannel fabric and wipe the silver, then rinse with warm water and allow to dry.
With the problem of how to clean the chain from blackthe ordinary vinegar will perfectly cope. It is soaked for several hours, then washed with cold water and dried. In order to clean the chain, you can use ammonia with water (proportions of 1 tsp per 100 g) and some non-abrasive detergent. All ingredients are mixed in a glass jar, then the chain is lowered there and the container is closed with a lid. Within an hour the product will look like it originally had. You can also use a mixture of tooth powder, water and ammonia in equal parts. There for 30 minutes put a silver product, and then it is passed through a toothbrush (not hard).
How do I clean a conversation?
The easiest way is to boiljewelry in potato peelings. To do this, put a clean potato peel in the pot and lower the decorations (without stones), boil on low heat for about 20 minutes. Then merge the floor and wipe the decoration dry. Another thermal method for removing plaque from silver products is boiling it in water with the addition of 2 tbsp. baking soda. Do not forget to cover the bottom of the tank with food foil beforehand, water should boil for five minutes (soda can be replaced with citric acid).
Lighten silver decoration can be drycleaning. Food baking soda should be spread on a paper towel, put a chain there and gently rub with your hands, repeating the movements as if you were washing it by hand. After this, the product is carefully pulled through a clamped towel, wiped with a tissue. Instead of soda, you can use tooth powder. Care should be taken to avoid accidental scratching on the silver surface.
You have learned in this article simple ways, likeclean the chain of silver from blackening or other plaque. Take care of your jewelry carefully, start a separate box, chipped with a soft cloth, do not forget to make preventive cleaning. After all, beautiful radiant decorations can produce indelible impressions on others and will bring joy for many years.
