Liquid wallpaper: rapid transformation in the interior
During the last ten years liquid wallpaperhave become very popular. This is not surprising, because they, on the one hand, look much more attractive than the usual types of wallpaper, and on the other - have a number of advantages in comparison with paper counterparts.
The application of liquid wallpaper is much easier thangluing conventional, in addition, they are more environmentally friendly and durable. As for the appearance, then there's nothing to say, because liquid wallpaper on the attractiveness can give odds to almost any modern finishing material.
Thus, we can assume that the question, wherebuy liquid wallpaper, for today is not actual, because they are sold in almost all large building supermarkets, and even more so in specialized stores.
In its original form, liquid wallpaper for wallslike a cross between sawdust and fibers of different colors, packaged in bags. At the same time, the first impression is not so deceptive - this building material is made of cellulose and cotton or silk fibers.
Liquid wallpaper in the interior
By and large, liquid wallpaper can be appliedpractically in all rooms, including the kitchen and bathroom, however with one reservation. In rooms with high humidity, as well as in environments where water can get on the walls, this material, after drying, should be covered with varnish or paint.
This is necessary because the lag blurs the wallpaper andover time they can completely come to naught. At the same time, the paint coating creates a protective layer, which prevents the negative impact of water on the finishing material. Also it is necessary to tell a little about the coloring of liquid wallpaper. They can be sold almost any color: white, blue, red and so on.
They can be mixed together forobtaining a new color scheme. In addition, if you wish, you can independently tint the solution according to your tastes - just buy a special dye in the same store. Since in the liquid state this material is elastic enough, you can independently make from it a variety of decorations on the walls.
Liquid wallpaper: how to glue
Immediately it should be said that this material is notglued, and applied to the wall by means of a special spatula. Now let's figure out how to apply liquid wallpaper to the wall. At the initial stage, make a solution in accordance with the instructions on the package. As a rule, the mixture is diluted in a ratio of 3 to 1 or 4 to 1, but again, it is better to carefully study the instructions on the package.
In the event that you want the wall to beWas washed with a damp cloth, you should add a little primer to the solution. In this case, the material will become more rigid, but it will get better resistance to moisture. It should also be noted that it is better to use warm water for mixing.
After you thoroughly knead the solution up tohomogeneous condition, you should let it brew (the required time is also indicated on the package). Before applying the material, it is necessary to prepare the walls, first, remove the old coating (paint, wallpaper, whitewash) from them, and secondly, they must be cleaned of a variety of small litter. After that, we put a special primer on the walls and let them dry.
At the final stage, we put on the walls,actually, the liquid wallpaper itself with a spatula. The thickness of the layer of the applied solution should be of the order of 3-5 millimeters. After you have spread the solution on a small piece of the wall (1-2 square meters), it is necessary to walk along it with a paint roller to smooth the surface. After the completion of all work, the coating should be allowed to dry for two days.
Author: Vyacheslav Kinko
