Which bath is better to choose steel acrylic or cast iron: reviews
The question of which bathtub is best to choosealmost all who started a major overhaul in the bathroom. Today there are quite a lot of variants of baths from three materials on the market: acrylic, cast iron and metal.
Metal baths, although they have their ownadvantages over other types of materials (for example, price and weight), but they do not make up for all the shortcomings (low level of noise absorption, relatively short life). Therefore, we will not dwell on them, but we will proceed to cast-iron and acrylic baths as the most popular in recent times.
Which cast iron bath to choose
Cast-iron baths, although they appeared all over the worldlong enough, still remain quite popular. Which is not surprising, because they have such advantages as low price, simplicity in operation, and also durability. Their main drawbacks are the big weight, plainness of forms, and also complexity in installation and repair.
Because of the complex manufacturing process, mostCast-iron bathtubs have a fairly simple rectangular shape, which in different models differs only in details. At the same time, their length can vary significantly from very short (as a rule, Italian production) - from 100 centimeters and to elongated (Russia, France) - 170-180 centimeters.
The depth of the font can also vary, howevernot so much - from 40 to 50 centimeters, in contrast to the width, which is almost always 70 centimeters. The main thing that you should pay attention to when choosing a cast iron bath is the quality of its casting and enamel coating. With a low quality casting on the outer walls of the bath you can notice streaks, roughness and other defects.
At the same time, high-quality fontscharacterized by flat edges and flat angles. It should be noted that some manufacturers additionally cover the outer walls of their products with powder enamel, which significantly increases the service life of the bathtub as a whole. Also meticulously, the quality of the enamel covering the inner walls of the font should be studied.
The fact is that the chips and cracks on the surfaceit is impossible to restore, and further from the damaged area, the destruction can spread to neighboring areas, which can cause detachment of the enamel itself. So, if you do not know which bath to choose, the reviews can only help determine the firm, but the quality of the product you will have to evaluate yourself.
Which acrylic bath to choose
The main advantages of acrylic baths,compared with the rest, are light weight, a variety of shapes and ease of operation and repair. Acrylic by its characteristics is very close to plastic, which is additionally covered with a protective layer of reinforcement. This is what determines its positive and negative qualities. Due to the fact that the fonts from this material are blown, they can be given any shape and color.
At the same time, under the pressure of water without proper protectionsuch a bath can just burst. Therefore, it is recommended to install it on a strong frame, and not on legs, as, for example, install cast-iron baths. Also very much depends on which firm to choose a bath, do not succumb to low prices and screaming advertising - this is not the kind of commodity that you should save on.
The most important thing that you should pay attention to whenpurchase of a bath of acrylic, - the thickness of the sheet from which it is made: it should not be less than 5 millimeters. Do not forget about reinforcement, because it protects acrylic from deformation under the pressure of water. A quality bath can easily withstand the fall of a metal object, in addition, it is fairly easy to recover with a special repair kit.
Author: Vyacheslav Kinko
