Stretch ceiling

At present stretch ceilings are widely used in interior design not only of expensive mansions and cottages, but also in the design of quite ordinary standard apartments. Stretch ceilings ideally hide unevenness of the main ceiling, cracks or inter-panel joints.

HThe tension ceiling is a A continuous sheet of PVC film or fabric, which is mounted on an aluminum or plastic frame (baguette), attached to the main ceiling.

Fabric stretch ceiling made of PVC filmis produced by welding PVC strips on a special machine according to individual dimensions. With special gas guns, the web is heated to a temperature of about 70 ° C, after which the film softens and stretches onto the pre-assembled frame.

Stretch ceilings of this type are "afraid" of sharp objects and low temperatures, so care should be taken when using them.

The fabric for stretch ceilings has no seams and is a thin fabric mesh impregnated with polymers. The installation of such a cloth does not require additional manipulation: cutting off a piece of the right size from a standard roll, it can be immediately installed on the frame.

Fabric seamless stretch ceilings are inferior to vinyl in a variety of colors and textures, but they are more durable and are not "afraid" of negative temperatures.

Thanks to stretch ceilings, the ceiling design has become much more diverse. Bleached with lime, painted with white water-based paint or wallpapered over ceilings slowly disappear into the past, giving way to beautiful landscapes, various textures and the "starry sky."

Technology stretch ceilings "starry sky"simple, but it looks very impressive. Due to LEDs with different light filters and crystal scatterers on the ceiling, you can create a unique game of light, beautiful color spillovers and gentle flicker.

Installation of stretch ceilings

High speed installation of ceilings and lowlabor costs in the performance of installation work are one of the main advantages of stretch ceilings. In addition, all works are very clean - no construction debris and "white tracks".

Aluminum or plastic profile - "baguette" - is mounted on the main ceiling using the "dowel-self-tapping" system. The stretch ceiling should be at least 3 cm or more from the ceiling-base if you intend to install communications or wiring, lighting fixtures.

The stretch ceiling fabric is attached to the profile in one of several ways. Vinyl suspended ceilings are fixed by harpoon or globular method, and fabric seamless ceilings are corded or cordless.

At the end of the stretch ceiling installation The gaps remaining between the walls and the mounted ceiling are covered with a special decorative cover made of hard or flexible PVC.