How to drive a nail

Drive the nails not perpendicular to the plane, but slightly at an angle, driving a few nails from different angles, you will connect the parts much more firmly ...

This process largely depends on the size of the nails: Smaller it is more convenient to slaughter with a small hammer (up to 250 g), and a length of more than 80-100 mm - with a hammer weighing 400-500 g. Start to pound lightly, and making sure that the nail enters correctly, finally hammer by two or three sharp blows. So avoid splitting the tree and get a tight joint. And for greater strength, select a long nail that enters the main part of the structure by at least one third. Nails driven at an angle to each other, will ensure the rigidity of the structure.

</ p>