How to connect speakers to a computer
Not always computers or laptops are equipped withpowerful sound speakers. And quite often we lack the power of sound. And when the house guests or small children and do have to listen, to normally watch a movie or listen to your favorite music. In this article, we'll show you how to connect speakers to your computer easily, simply and without help from outside.
How to connect ordinary speakers to a computer
On the back of the system unit of your PCthere are many connectors. Manufacturers specifically designate them in different colors. With such simple tips you can independently navigate in where to connect speakers, a microphone, a mouse, a printer, a monitor. Almost all modern motherboards already have built-in sound cards. Speakers to the computer are connected via mini-jacks 3.5 mm, which is usually indicated in green.
Now turn on the computer and speakers, makecheck. If you did everything right, but the speakers still do not work, there may be problems in your operating system. Usually windows itself loads and installs the necessary drivers. If after the connection you did not pop up the driver window, then you need to reinstall them. You can use the installation disc that comes with sound speakers. Check your mixer, if all channels are turned on and the volume is set.
On a note: if you purchased speakers with a connector that is larger than a mini-jack, you will need a special adapter. You can buy it in all electronics stores or order online.
How to connect car speakers to a computer
If you think that this is from the realm of fantasy,then this is not so. Usually car speakers are passive and if you just plug them into the connector or through the adapter, the sound will be, but very quiet. Therefore, in order for the speakers to function normally and perform their immediate function, you will need an amplifier. Which is right for your speakers, the envy of the manufacturer, the speakers themselves and the expected result. The most correct solution in this case is going to a good acoustics store, where you will be prompted what to do.
Connecting the Speaker System
If you want to connect not just audiospeakers, and a subwoofer, a microphone and other devices, you need an acoustic system. When you connect it, you can have some difficulties. So try to follow the instructions that we have prepared for you:
Usually on the back panel of the system unit there is a green audio connector, there you also need to insert a signal cable;
now turn on the computer and the speakers themselves;
check the sound. Quite often, you can adjust the purity of the sound and adjust the system using the buttons on the system itself. If they are not in the Toolbar, find Audio Audio and turn it on;
if you need to connect additional devices (microphone, subwoofer) your PC must have a special sound card. It can be bought separately.
Now you can easily make a real concert at home or organize a small cinema for relatives and friends.
After you have read our article, you can easily connect the speakers to a computer of any complexity and configuration.
