Windows 7 is not loaded: what to do

The reasons why Windows 7 is not loaded may be the mass, starting from problems with the installed softwareand ending with a malfunction of the equipment. Usually, if any part of the computer is faulty, you can hear it during the initial testing of the computer components.

Surely when you boot your computer, youheard a short beep, not coming from the speakers, but from the built-in speaker in the system unit. This signal means that all components of the computer are working. If there is no signal, and if the signal is long or several, this indicates a malfunction of one of the components. Therefore, you do not boot Windows 7. You can read about what exactly these signals mean when downloading in our article.

But what if, judging by the signal, the "stuffing" of the computer is normal, and the operating system still does not boot? If you have two hard drives, the boot order in the BIOS may have gone down: the first in the download queue is not the disk on whichwhich installed the system. Naturally, the system can not boot. To test this guess, you need to go into the BIOS and boot queue when loading the computer (as it should be written in the instructions to your motherboard) and, if necessary, change it.

If the first place in the download queue is the right disk, Did not you put any new programs, did not you connect any new devices. Perhaps the problem is in them (especially if before the operating system was loaded normally, and immediately after installation, and went failures). What should I do in this case?

Try the next time you boot your computerenter the safe mode. If you succeed, first check the startup and remove all unnecessary programs. If you recently installed a program or equipment and think that the problem is in them, try in safe mode to uninstall the program or disconnect the hardware and remove the appropriate driver. It also does not prevent you from scanning the computer for viruses of one of the anti-virus utilities in a safe mode.

If you do not boot Windows 7 even in safe mode, try to find the installation disk with the operating system - it will come in handy. Most likely, the problem in the damage to MBR (Master Boot Record - the master boot record), the installation disk will help restore the MBR and, accordingly, the normal boot of the operating system.

Insert the Windows 7 System Restore installation disk or disk and insert boot from disk (usually to boot from the disk you need to pressa certain key on boot, or set the boot priority in the BIOS). If you are prompted to select a language when booting from the disk, do this, and then select the restore from the list of suggested options.

For some time you will have to wait for the computer to collect information about installed systems and offer you a list of possible systems for recovery. You need to select the appropriate Windows installation. Perhaps you will be prompted to automatically correct the system. Why not try it - can help. If you do not want to try to fix the automatic fix, you just need to choose "No".

The next step is the System Restore Settings window. Here you can start with the option Startup Repair - restore the startup in automatic mode. There is also the option to restore the MBR manually. To do this, select the command-line mode and enter the following commands on the command line:

• 
  bootrec.exe / fixmbr
• 
  bootrec.exe / fixboot

The first command will restore the MBR (in some cases this is quite enough), the second - boot sector of the system partition of the hard disk and boot configuration data. After completing the restore, restart the computer without the boot disk in the drive.

As you can see, there are several reasons why Windows 7 is not loaded, so the ways of solving this problem can be different. In "running" cases it may be necessary to reinstall the system, but it is usually possible to solve the problem in other ways.