How to make a bracelet with your own hands?
The bracelet is an ornament, since ancient timeswidely distributed among different peoples of the world. Today in jewelry stores or jewelry shops you can buy a variety of bracelets, but the most unique and unique are the bracelets made with your own hands. About, how to make a bracelet with your own hands, you will tell the Country of Soviets.
To make a bracelet with your own hands, First you need to choose what you want to make it from. Thus, today's bracelets are made ofall kinds of materials: metal, plastic, wood, beads, beads, threads, leather, textiles, stone, polymer clay. In addition, you can use any material available at your fingertips, for example, tapes, ropes, nuts, washers, ice cream sticks, buttons, paper.
When you choose the material for the bracelet, think what kind of bracelet design you need: Hard or soft. Among the hard bracelets, isolated, springy and articulated. Soft bracelets are divided into chain braids.
Closed bracelets have the form of an integral ring - this is the mostsimple bracelet design. Springing bracelets look like a torn ring: to put such bracelets on your arm, you need to make an effort and take the ends of the ring to the sides, then the ends close tightly on the wrist and fix the bracelet.
Articulated rigid bracelets are two halves, connected on one side by a hinge, and on the other by a lock. When you put on your hand, the lock opens and then snaps into place.
How to make a bracelet with your own hands? A few ideas
From improvised materials can turn out verybeautiful bracelets. For example, you can make a bracelet from a plastic bottle with your own hands, decorating it with threads, ribbons, cloth, beads, rhinestones - in short, everything that only exists in the house.
From the bottle cut off the ring of the desired width - as a rule, up to 5 cm. To make the ring smooth, you can use a simple method: wrap the bottle with a wide tape of scotch (construction), and then cut the bottle with a sharp clerical knife along the edges of the tape. By the way, you can not remove the adhesive tape, and even vice versa, it is necessary to wrap the workpiece with adhesive tape also from the inside, paying special attention to the sharp edges - this will help make the bracelet more convenient.
Further The workpiece can be wrapped with a cloth to your taste: Cloth fix glue, for example, from gluepistol. The subsequent finish also performs on you own taste. So, you can wrap a bracelet on the middle line with a beautiful ribbon or braid, you can paste rhinestones, laces, buttons, etc., to the bracelet.
Another interesting idea for a bracelet with your own hands from improvised materials is manufacturing of bracelet from pins and beads or beads. This bracelet is made very quickly, literally in 10-15 minutes, and it looks very impressive.
For bracelet it takes a lot of pins - pieces 25-50, depending on the width of the wrist andthe size of the pins themselves. It will also require a lot of beads or beads: their color and size are selected individually. Still need to be 2 pieces of thin rubber or elastic silicone thread.
On each pin you need to thread about 5-6 beads (beads). The order of stringing does not matter, ifonly you do not want to lay out a certain pattern. In the latter case, it is best to first draw a pattern on the paper, and then perform the stringing according to this scheme. Next, you can proceed to thread pins on the elastic: pins are recommended to have a "knave". The ends of the rubber bands should be tied together.
To make a bracelet with your own hands, it is not necessary to be limited to the givenexamples. Only by flying your imagination is there a limit to creativity: you can make a beautiful and original bracelet even from a sweater or an old T-shirt! Try, experiment, and you will definitely find the right one for you!
