How to properly sew jeans with your own hands - video

Features of the female figure are such that oftenJeans, perfectly fitting hips, are a bit too large at the waist. This problem is not very serious, but it can significantly spoil the harmonious image of a woman. Therefore, in most customers, the question of how to sew jeans, occurs immediately after their purchase. In addition, suturing jeans in both the waist and hips is necessary in the event that a woman gets rid of excess kilograms, and her figure loses volume. In any case, you can customize jeans "for yourself", but for this you need to master some skills.
Before you sew jeans at the waist, you need togently tear the belt itself, branded label (if it is at this place) and three back zlebovki. Then you need to cut each side seam, starting from the upper end of the front pocket, to the top edge. Remove the remaining threads and carefully smooth the seams. To sew the jeans correctly, you first need to apply lines along which the seam will pass, for this you can use a chalk or a thin sifting.

Then it is necessary to cut off excess fabric, deviating fromthe planned lines of 1 cm, turn the jeans inside out, combine the edges of the slices and stitch with a stitch. If the upper edge of the pockets is reinforced with metal rivets, they can interfere with making an even seam. In this case, the line must be finished, not reaching the rivet about 1 cm, and then sew this section with a hand-stitched seam. After the second side seam is processed in a similar way, the jeans will become smaller at the waist, but not more than 4 centimeters.
If this is not enough, you can sew jeans notonly on each side, but also make two (or more) triangular tucks along the waist line. Very carefully you need to perform them in the buttock zone, because such darts can visibly tighten them. Darts should be done neatly and have them strictly symmetrical, sewing each two times.
If the jeans have a rivet, embroidery orapplication, tucking should be placed so that it does not violate the model composition. After the jeans are sewn, it is necessary to attach a belt to them and note which part should be cut off from it. The incision site is well "masked" by a back loom or by a branded tag. The rear side skirts must be perfectly symmetrically positioned, and the central back belt loops are exactly in the middle. The firm tag should be sewn by hand to the places of old punctures.
Thus, it will be possible to restore the engineseam and make their "intervention" invisible. There are times when jeans, on the contrary, fit perfectly at the waist, but in the hips they are too wide. To sew jeans along the thigh line, you can use the same technology of darts, but they should be placed along the thigh line.

Another problem of the female figure isThe fact that the waist and hips can have more curvy shapes than the rest of the body. Therefore, jeans, perfectly fitting the upper part, can be too wide from below. To sew jeans in the legs, you need to cut their inner seam, and then cut off and zastrochit by their standards. In this case, one should never rip open the perineal zone, since it will be very difficult for a layman to collect it correctly.
By the same technology can be sewn and jeans flared,to change their style. Of course, it is best to entrust such work to a specialist, since modern jeans models have so many complex seams and various decorative details that they can easily be damaged and irrevocably ruined a beautiful thing.
Video: how to self-sew jeans













