Decoration of wedding champagne with your own hands: photo and video. Master-class with step-by-step instruction

Necessary materials:

• 
  a standard bottle of champagne;


• 
  glue gun, super-glue, PVA glue, solvent (or alcohol), cotton swabs;


• 
  scissors, iron;


• 
  strips of fabric (brocade, taffeta, satin) for pasting the bottle - 4 pcs. (width 5 cm, length 12-15 cm).


• 
  A strip of fabric (gypsum, tulle) - 1 piece (length 30 cm, width - 6 cm).


• 
  ready-made artificial leaves (or cut them out of tissue paper);


• 
  stripes of blue and red fabric of gold of different length and width (from 3х10 cm, to 5х15 cm) - for making flowers;


• 
  paper decorative tape (blue, pink, gold);


• 
  Needle and color matching threads.
  

  
  

  
  

Decoration of wedding champagne: a master class

1. 
   Before you start decorating the weddingchampagne, you need to prepare the bottle itself. Wash it. Use warm water and a brush to remove all paper labels and labels. Then dry the surface and degrease, wiping off with your special remedy. To the note: if you are not going to decorate the wedding champagne in silver tones, do not wipe the golden foil on the neck with alcohol or solvent: the gilding is instantly erased.
   

   
   

   
   

   
   

   
   


2. 
   At the prepared strips of fabric, press 0.8 -1cm on the wrong side. In the fabric that will be used for gluing the bottle - tuck only one side, the stripes from which the flowers will be made - press all four sides. Fold the guipure strip in half along the length.
   

   
   

   
   

   
   

   
   


3. 
   Preheat the glue gun. Apply stripes at an angle, as shown in the photo, quickly glue the ends of the fabric. Place the next row on top of the first one. And so to the fourth row. Then, around the bottle, fix the guipure fabric, also using an adhesive gun.
   

   
   

   
   

   
   

   
   

   
   

   
   


4. 
   From the guipure narrow strip make a "skirt" forthe grounds of wedding champagne. Collect one edge on the thread, evenly distribute the shutters and glue the "skirt" with "super glue". See the video and photos.
   
   
   

   
   Tip: Act very quickly and carefully so that the glue does not get on the skin.

   
   
   

   
   

   
   

   
   

   
   


5. 
   We fasten leaves and twigs. Now from the same fabric, from which the top of the wedding champagne is decorated, cut out a piece suitable for the size for the bottom part. Put it on top of the "skirt" and the guipure part, so that the place of attachment of the "grass and leaves" is hidden. Glue the fabric.


6. 
   Then from the golden paper tape form the wedding rings.
   

   
   

   
   

   
   

   
   Note: If the braid is one-sided, as in this case, glue with glue PVA two pieces of gold side out.
   

   
   

   
   Gently spread a circle of "super-glue"ring and press it to the surface of the bottle. From the other ring, first cut and glue the element that is located inside the first ring, then bend the second part and glue so that the elements are as close as possible.
   

   
   

   
   

   
   

   
   

   
   

   
   


7. 
   Flowers are made with the help of needles and thread,wrapping strips of fabric inside and sewing at the base. You can take ready-made flowers from fabric or from polymer clay. Just need seven roses. We attach them to the glue gun.
   

   
   

   
   

   
   

   
   


8. 
   The decoration of the wedding champagne is almost finished. It remains to make a light top decoration. Tie around the lid paper tape and glue the rose.
   

   
   

   
   

   
   

   
   

   
   

   
   

   
   

   
   

Wedding champagne with your own hands is ready!

You will also be interested in articles:

1. 
   Wedding glasses decoration


2. 
   Gift box for money for a wedding with your own hands


3. 
   Original invitations to the wedding with their own hands