The secrets of effective iron cleaning from carbon deposits
It's hard to imagine that about another hundred years agoour great-grandmothers got rid of ugly folds on clothes, using huge coal irons, weighing several kilograms. But progress does not stand still, and the current devices are small in size, weight with a mass of functions designed to ease our daily worries. To date, most people simply can not imagine their life without using this assistant, which in a matter of minutes can give an elegant look any unsightly mint things. But there are situations when this household friend needs your help. For example, it can be the formation of rusty deposits or deposits on the metal sole of the iron. How not to spoil your things and successfully get rid of this problem - read in our publication.
Why does a solder deposit or a rusty coating appear on the soles?
The cause of black carbon on the metal partIron most often becomes ironing synthetic clothes. It is possible that the wrong temperature regime was selected for these products, and they melted slightly. This can indicate only that unpleasant smoldering smell, which will appear after ironing this garment. Visually, you will not see this in any way. However, the remaining synthetics and plastics on the sole continue to melt there, resulting in blackening and securely adhering to the surface of the iron.
If you notice it is not black, butrusty spots near the steam holes, then only one conclusion can be made: it is a scum from water, which becomes brown under the influence of high temperature from white. Therefore, if when ironing the laundry, you noticed on it beige spots and a substance similar to lime, then you know - this is the scum from the water from the tap. In order to avoid this - just fill the iron container with filtered or distilled water.
How do you clean it from the stench and plaque?
Do not be in a hurry to get upset, let alone carry your iron on the scrap heap. There are several effective ways that will help to solve the task.
With burnt synthetics perfectly handlesacetone or gasoline. To do this, you need to lightly heat the iron, then walk on its sole with a cotton swab dampened with gasoline or acetone. In addition, you will most likely need an unnecessary rag, about which you can wipe off the residue of carbon.
If the iron slightly affected by the ironing of synthetics, then with burnt spots, table vinegar will perfectly cope. The procedure is the same as with the use of gasoline.
In case you are faced with the problem of scaleon the sole of the iron, then with it perfectly handle alcohol-soaked kitchen sponge. Wipe the surface with a coarser side of the washcloth. It is best to use medical or ammonia.
If the above described method did not help, then there is a senseArmed with a stronger means. For this, a small amount of liquid for punching pipes is perfect. Be sure to use rubber gloves, otherwise you risk ruining your hands.
But the most effective method in case of scale andcarbon deposits, there still remains the use of a special pencil. You can buy it at a hardware store for a small price. Apply it as follows: on the heated surface of the iron to walk through this pencil, and then remove the remnants of dirt with an unnecessary piece of cloth.
We are sure that among all these methods for cleaning the iron from the carbon you will find the most suitable for your problem. Let the purity and order reign in your house!
