How to glue a ceiling skirting board
The gluing of the plinth is the final stagein the finish of the ceiling, regardless of the material from which it is made. This procedure can be performed independently and do not resort to the help of specialists. In this article, how to glue the ceiling skirting.



This procedure must be performed before painting the ceiling and before pasting walls with wallpaper. One skirt is recommended for buying skirting boards. The material should be chosen so that it is smooth and well pressed.


To glue the ceiling skirting, you will need ladder, as well as special glue, which is recommended to use liquid Nails. In addition, take care of purchasing an adhesive gun for more convenient extrusion of glue from the container.


Many people use Glue-sealant for fixing skirting boards. It is just as reliable as liquid nails, but in order for it to grasp, it will take considerably more time, that is, it will take considerably longer to press the plinth to the ceiling.


Before gluing the skirting boards, be sure to treat the walls with sandpaper with a large grain for more reliable adhesion of the glue to the surface. Remember that in no case Do not need to push the ceiling skirting into every unevenness wall or ceiling. Try to stick it in a straight line or by arcs. It is better then to seal the formed cracks with putty, which should be applied to the level of the lower edge of the plinth.


Separately, it is worth paying attention to cutting skirting boards. Particular complication is caused by the details adjacent to the corners of the room. To cut them, you can to use the most common hacksawHowever, it is worth giving preference to the instrument withsmall teeth, because the foam from which the skirting boards are made, is very easy to crumble. Also, for precision cutting, it is recommended to use a joinery device such as stool.


In the stores of building materials you can find special corners for ceiling skirting boards. They are glued to the corners of the room, and then they themselves are inserted skirting. This approach is very convenient, since it does not require cutting the material at an angle.


Apply glue to the skirting boards recommended by points every 7-10 centimeters. When glued, it slightly crawls, forthereby increasing the adhesion area. The ends of the skirting must be joined at a right angle. After applying the glue, place the material in the right place and hold it for a while to give the glue a better grasp.


Then carefully inspect the glued plinth from the floor: evaluate how it looks and whether there are gaps. When gluing, try not to use very short pieces of skirting. The point is that the joints of such elements are very noticeable.


Puttying ceiling skirting is recommended the next day. In gypsum putty it is recommended to add water-based paint. After this, slide the spatula alongplinths to remove the rests of plaster. Then it is necessary to thoroughly treat all with a primer and start painting. As a rule, for ceiling skirting boards and ceiling use a paint of one color.


How could you be sure to glue the ceilingskirting is quite easy. Complexity can only cause the material to be cut for gluing skirting in the corners. However, if you are not sure that you will be able to perform such work accurately, we recommend that you turn to professional building brigades for help.


How to glue a ceiling skirting board
Comments 0