Filling 3D floors in the apartment: manufacturing technology, photos, reviews
Filling 3D floors - this is a newfangled technology fordesign of the room. The first transparent floors appeared in Europe 50 years ago, but they were not used because of their high cost. Today in our country such sexes are becoming very popular. Filling 3D floors, the technology of their manufacture - the topic of this article.
What is self-leveling floors
Filling 3D floors: the technology of their manufacture has nothing to do with 3D images on TV screens. The basis for the manufacture of such floors was the creativity of 3D artists. They can draw large voluminous images on different surfaces. Most often it is done on asphalt. This technology allows you to create images that seem to be voluminous, if they are viewed at a certain angle. The technology for creating three-dimensional drawings borrowed by designers for the design of premises. So the first 3D floors appeared.
The process of manufacturing liquid 3D floors is enoughlaborious and expensive. But the result will delight you for a very long time. The fact is that the technology of manufacturing the floor can avoid the formation of joints. All materials do not harm the human body or the environment. They are resistant to abrasion and temperature changes.
For the above reasons, bulk floors are veryoften used in the design of restaurants, cafes and other public institutions. Such a floor brings its zest to the interior. The use of bulk 3D floors is becoming very popular when designing an apartment. Especially often they are used in rooms where there is a lot of furniture and a lot of open space.
The application of liquid floors is best entrustedspecialists. Non-professionals at the very beginning can make a number of mistakes that will affect the quality of the floor. As a result, your floor can not only deform or crack, but also become bubbling. However, if you are confident in your abilities and are willing to take the risk, then you can pour the filler floor yourself, after carefully studying the instructions.
![]() | ![]() |
Photo of polymer floor | Photo of a jellied floor |
What you need to make a 3D floor
The preparation of the filling floor begins withpreparation of the base on which it is applied. In most apartments the basis for the floor is concrete, on which there may be seams and cracks. The latter appear as a result of shrinkage of the material and a change in the temperature in the room. To ensure that the floor is not deformed and does not spoil its appearance, it is necessary to thoroughly clean the substrate of dust with a vacuum cleaner. Particular attention should be paid to cracks in which grains of sand may remain. After removing the dirt, the floor is covered with a primer.
The base for the bulk floor should not be madeonly perfectly smooth, but at the same time give the surface a little roughness. To do this, the top layers of the primer are mixed with fine quartz sand. Additional gluing with fiberglass will strengthen the base of the floor. After the primer has dried, the quartz sand residues are removed from the floor surface. If several errors are made at this stage, the filling floor can later become deformed, defects and cracks can appear on it. After the preparation of the base, a polymer coating is applied to the floor, which after drying is covered with two layers of varnish.
3D floors are produced in the same way as conventional onesliquid, only first on the pre-prepared basis lay a sheet with the image. The floor dries for 5-7 days with good ventilation. A layer of varnish will protect the covering of the filler floor from the penetration of moisture and exposure to sunlight. Self-leveling floors have high impact strength.
In addition to the figure, it is possible to place in the polymerSmall items, such as coins, small shells, sequins and fluorescent elements. By the way, liquid 3D floors can be used to decorate steps.
As you can see, the technology of bulk 3D floors canseem not very difficult. In fact, there are a lot of nuances in the process of filling floors, so do not try to save by doing all the work yourself. Entrust your floor to professionals, only in this case you will get a quality coverage.
![]() |
Photo of decorative 3D floor |
How to make self-leveling 3D floors













