How to start a computer through BIOS
Developers operating system windowsits automatic start. But if the settings of the kiosk (BasicInput-OutputSystem) are not installed correctly or if the system itself fails, automatic start is impossible and you need to enter the BIOS-base input / output system.
How to run windows via bios on a computer
Bios is a built-in program in the motherfee, which is responsible for the established operation of the operating system (in our case, Windows) and PC components. In order to enter the BasicInput-OutputSystem, you need to press the button at the bottom of the screen for 3-5 seconds to boot the computer, usually it's BIOS Setup or Press DEL to enter setup. Also you can enter the BIOS at boot by pressing any of these keys: Delete, Ins, Esc, F1, F2, F10. Probable and any combination of keys, it depends on the operation system, the manufacturer, etc. Most often you will be told which keys or their combination should be pressed.
If you are already logged into the basic input / output systemUse the arrows on the keyboard to select the "Boot" section and press Enter to enter. Next, you need to run the following commands: Advanced BIOS Features → BootdevicePriority. Your next steps will directly depend on the root cause of problems in the operating system and the need to run it through the BIOS. If the Windows is malfunctioning or corrupted, you will need to insert the installation CD into the drive and specify the CD / DVD-ROM as the first boot device. If you want to install the OS not from the installation disk, then in the same section FirstBootDevice, specify HardDrive (the name may differ, the main thing is that it was a hard disk). After you have made changes to the settings you need, click SaveandExitSetup or you can make the following Esc → Exit → Save and Exit Setup. If you manage to fix the problem with the hard drive, windows will boot at the next attempt. When booting from the installation disc, follow the prompts of the installation wizard. It will prompt you to correct errors that will be detected during the startup process.
How to start a laptop from a disk via BIOS
In order to start the laptop from the disk throughBasicInput-OutputSystem, you need to change the parameters of the bois. To begin, insert the installation disk into the drive, the laptop must be turned on. Reboot the OS and immediately press F8 (in different models it can be other keys or their combination). Next, you should execute the following commands: InternalDVD-Rom → Enter → Press any key to boot from CD → any key (such an action algorithm is suitable in case of windows start from the installation disk). You can also enter the bios using a different method. Turn on the laptop, press F2, then Start BIOS and Enter.
After that, you need to make the necessary changesBoot Settings → Boot Device Priority → First Boot Device → Internal DVD-Rom. After that, do not forget to save all the changes, for this in the main menu, click Save & Exit, and then Enter. After that, the computer will reboot and you will see Press any key to boot from CD. You can use not only the disk to install Windows, but also any other storage device.
Now you can easily run windows through bios on a computer or laptop. And you can independently adjust the operation of your operating system.
