Mounting the shower enclosure

Mounting the shower enclosure - mandatory procedure for those who domajor repairs in the bathroom and decided to abandon the installation of the bath itself. Installation is not anything complicated. All that will be needed is the availability of certain tools and skills to use them.
Today There are several types of shower cabins. The choice of such a device depends on the size of your bathroom, the budget and many other factors.
As for the tool, for fixing the walls of the cab or guides to the walls of the room you will need drill, screwdriver, ruler-level, as well as dowels and screws of the appropriate diameter. In addition, silicone or acrylic sealants and a tape tape will not be superfluous.
The installation of a shower enclosure implies that the floor below it should have a slight slope, which is also called a ladder. It is necessary to ensure the drainage of water from the floor of the cabin. In addition, this will prevent the formation of puddles. Usually in this way equip showers in hotels and gyms. It should also be noted that this type of pallets will be more convenient for children, the elderly and disabled people.
The advantage of such a drain is that The cockpit can be made absolutely of any size. However, there is a drawback, which iscomplexity of creating a ladder and reliable sealing. If the installation is done incorrectly, there is a risk of flooding not only your apartment, but also the one that is located on the floor below.
You can also install flat shower tray, which has low sides. To install such a pallet, you must first prepare a platform for it: hollow the groove in the cement floor screed, corresponding to the dimensions of the cabin. Next, the location of the drain is determined, which will depend on where the drain hole is in the pallet. As a rule, all pallets are equipped height-adjustable feet. Also, we should not forget that for the drain of water the pallet should be installed with a slight slope.
After installing the shower floor, you must go to the installation of the walls. Usually any unbreakable transparent or translucent material is used, for example, plexiglass or plastic. We strongly do not recommend buying glassware, as it easily fights, and glass fragments carry a great danger. It is worth noting that the use of transparent walls visually enhances the bathroom.
Today on sale you can find a huge amountfinished walls, complete with which all the necessary fixing materials for installation are supplied. The walls may differ in design, the way the doors are opened and the material of manufacture.
After installing the pallet and the walls you need check all seams for leaks and if necessary, seal them with silicone sealant.
There are models of shower cabins with a built-in steam generator or hydromassage. For the operation of such devices, power supply, which connection should be entrusted to a professional electrician, as this procedure requires compliance with safety regulations and knowledge of the features of conducting electricity in bathrooms.
Finally it is worth noting that the installation of a showerThe cabin is not anything complicated. As a rule, all necessary parts are included in the delivery of all finished parts. However, if you are not sure that you are able to properly perform the installation, we recommend that you seek help from specialists. In this article, we did not consider the installation process in detail, telling only about the main points, which must be paid attention.














