How to build a swimming pool with your own hands
In the summer heat, I want so much that at least somethe reservoir was near. Alas, in order to swim, you have to go to the country, outside the city or wait for a vacation. It's a waste of time and money, and in the heat a little where you want to go. But the pool is just an urban oasis! How to build a swimming pool with your own hands? Believe me, there is nothing difficult!
At first you need to determine the size of the. Try to draw the boundaries of the territory so that the pool is located closer to the water pipe. In addition, pay attention to plants and trees: it is important that the pool area is flat.
How to build a swimming pool with your own hands, not having construction training? In fact, this is a longer work than a difficult one. The whole difficulty lies in digging out the excavation. In order to dig it evenly, it is necessary to drive the pegs along the perimeter of the drawn surface and pull the thread. The shape of the pool can choose any, most importantly, so that it would be convenient to dig it later.
The pit Should be wider than the proposed pool. 40-60 cm is enough for the "allowance". Optimal depth of the pool is 1, 5-1,7 m. The walls of the pool try to make a gradient of 5-7 °.
For compacting the bottom you will need sand, roofing material and bitumenmastic. First, sand is laid on 20-30 cm, and after that, two layers of ruberoid and bitumen mastic are formed with a waterproofing layer. The ruberoid should go 20-30 cm to the walls of the pool in order to create a continuous, stable covering of the bottom.
It is necessary to create a formworkto pour concrete between it and the ground. It is desirable to use hydroconcrete or high-quality cement.
It is necessary to wait for the drying of concreteto apply a mixture of cement and water to the walls. This can be done with a normal brush. Thus, concrete hardens even more, turning into a powerful, stable material. It's not for nothing that the procedure for applying a water-cement mortar is called "ironing".
In the next stage The bottom of the pool is filled with rubble and stones. Next, you need to lay a steel mesh andconcretize it. In the direction in which the drain pipe is laid, the slope is made before the concrete freezes. Please note that the pipe is laid at the very first stage of the construction of the pool. It is not recommended to lay the pipe yourself, unless you are a plumber.
That's all! The question "how to build a swimming pool with your own hands" is practically solved. Now you can show a little imagination and place your pool as you please. The walls of the pool can be painted using a primer and oil paint. In addition, some lay out the pool with tiles, which also looks quite original and money is cheaper.
Well, now you can run the pool, having preliminary checked up connections of the pipeline. Tighten all check valves, ball valves and split couplings. Ensure that there is no leakage in the piping. So, you did everything right.
Now you know how to build a swimming pool with your own hands. It turns out nothing difficult. The main thing is that you know in advance how much material you need, having previously explored the territory for the construction of the pool.
