Lumbering

The beam can be used as a building material for the erection of small houses, and also be used as a finishing material in living quarters. Lumbering - a process that requires the presence of certain knowledge and possession of a special tool.
Finishing the walls of the room with a bar is not anything complicated. First, vertically fasten the guides at a distance of 1-1.5 meters from each other. Then on these guides are attached boards. For this, you can use self-tapping screws. To fasten wooden boards with nails is undesirable, since there is a risk of cracks on the material. As for fixing the guides, for them in the wall it is necessary to make holes with a perforator, into which it is necessary to insert dowels to screw the screws.
Stacking the beam when building a house is a much more complicated process: it is necessary to erect a foundation correctly, to knowthe principle of erecting walls from this material and much more. The tree is a relatively light material, so the foundation for the house of the beam does not need to be made powerful.
Separately it is necessary to consider the erection of wooden walls. For the base, a non-planed timber. Next, the profiledmaterial. It often happens that the walls are longer than the boards themselves. In this case, the bars should be increased. This is done by joining two bars: one part is sharpened, and the groove is cut in the second.
Laying of the beam for the construction of internal walls is usually done using boards with a cross section of 10x10 centimeters. Fasten the beam with nails orwooden nagels, for which it is necessary to drill holes. These holes in diameter should be slightly larger than the pegs, and the resulting gap should be covered with thermal insulation material, which can be used as a wood moss.
Particular attention when building walls should be turned on doorways, as well as on openings for windows. Be careful when cutting material, be sure to use a ruler-level and a weather-cloth for a more even and accurate styling.
When choosing a tree for construction, it is necessary to take into account method of drying the material. The bar can be dried in two ways: natural and artificial. The material, dried in a natural way, is much cheaper, but using this method of drying is harder to achieve complete drying. The bar, dried by an artificial method, is more convenient to use.
As for the thickness of the timber, it all depends on the purpose of the house itself. If it will be used for housing onlyin the summer, there will be enough boards up to 10 centimeters thick. If the house is inhabited by people throughout the year, the thickness of the timber should be at least 20 centimeters.
It is also worth noting that it is better to use a tree cut down in winter. The fact is that when this material dries out practically on it no cracks appear. However, it is also better to build a house from such a tree in winter, since the material does not form a fungus. In the summer, wood is simply treated with special antiseptics.
As you could see, laying the timberis a rather complicated procedure both in terms of direct laying of the tree, and in terms of the choice of construction material for the purchase. If you are not sure that you are able to properly and accurately perform the installation, we recommend that you seek help from specialists.














